Sovol SV06 F688ZZ Filament Runout Sensor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a filament runout sensor mount for the Sovol SV06 based on the F688ZZ bearing.
- Ocena
- 3 / 5
- Polubienia
- 23
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 1902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a filament runout sensor mount for the Sovol SV06 based on the F688ZZ bearing I had lying around. This one fits on top of the z screws of the SV06 but I have been told inserting one there is a bad practice.
The sensor attaches to the mount with two M3x20 bolts and the rest is friction fitted, which means you can just put them together by pushing them together, or with a clamp.
Parts needed:
2 X M3 20mm bolt
2 X M3 nut
1 X Filament Runout Sensor
1 X F688ZZ bearing
Prints best with a layer height below 0.2mm, no supports needed.
Attribution: The clamping system was roughly based on a remix of a remix of a remix on Thingiverse, I don't know the original author but I have drawn this one from scratch in SolidWorks.