RepRapDiscount Full Graphic LCD Mount for OrdBot Hadron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hey guys, first thingiverse upload.. so here goes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hey guys, first thingiverse upload.. so here goes.
I really liked the mount that Pablogil made for his printer and decided I wanted to adapt this to suit a Hadron.
See: http://www.thingiverse.com/thing:213852
Unfortunately you can't mount it on the top plate as even just naked the rotary encoder fouls on the x-carriage limiting Z height.. no good.
So I mashed this up with http://www.thingiverse.com/thing:157749
I've added some bracing and screw holes to put it together. I'm hoping it can be printed without support... test print shortly.
Update: Fixed some STL mesh issues with Netfab cloud for the imported STL, adjusted some alignment to make printing easier
Print instructions
Category: 3D Printer Parts Summary
Hey guys, first thingiverse upload.. so here goes.
I really liked the mount that Pablogil made for his printer and decided I wanted to adapt this to suit a Hadron.
See: http://www.thingiverse.com/thing:213852
Unfortunately you can't mount it on the top plate as even just naked the rotary encoder fouls on the x-carriage limiting Z height.. no good.
So I mashed this up with http://www.thingiverse.com/thing:157749
I've added some bracing and screw holes to put it together. I'm hoping it can be printed without support... test print shortly.
Update: Fixed some STL mesh issues with Netfab cloud for the imported STL, adjusted some alignment to make printing easier