RepRapDiscount Full Graphic LCD Mount for OrdBot Hadron
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hey guys, first thingiverse upload.. so here goes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Hey guys, first thingiverse upload.. so here goes.
I really liked the mount that Pablogil made for his printer and decided I wanted to adapt this to suit a Hadron.
See: http://www.thingiverse.com/thing:213852
Unfortunately you can't mount it on the top plate as even just naked the rotary encoder fouls on the x-carriage limiting Z height.. no good.
So I mashed this up with http://www.thingiverse.com/thing:157749
I've added some bracing and screw holes to put it together. I'm hoping it can be printed without support... test print shortly.
Update: Fixed some STL mesh issues with Netfab cloud for the imported STL, adjusted some alignment to make printing easier
Print instructions
Category: 3D Printer Parts Summary
Hey guys, first thingiverse upload.. so here goes.
I really liked the mount that Pablogil made for his printer and decided I wanted to adapt this to suit a Hadron.
See: http://www.thingiverse.com/thing:213852
Unfortunately you can't mount it on the top plate as even just naked the rotary encoder fouls on the x-carriage limiting Z height.. no good.
So I mashed this up with http://www.thingiverse.com/thing:157749
I've added some bracing and screw holes to put it together. I'm hoping it can be printed without support... test print shortly.
Update: Fixed some STL mesh issues with Netfab cloud for the imported STL, adjusted some alignment to make printing easier