Safety razor Travel case V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a simple travel case for your shaver with space for up to 10 new and used blades
- Ocena
- 5 / 5
- Polubienia
- 170
- Pobrania
- 564
- Wydruki
- 10
- Wyświetlenia
- 3486
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :)
I designed this travel case for my shaver, but it might fit yours as well. in addition you will need 8x d6x3mm magnets and can glue to hold them in place. I also put some foam tape on the top shaft part, so the razor doesnt slide around.
made for razors with maximum size:
- handle: d12.5x84mm
- head depth: 12.5mm size around should be fairly equal for every razor
settings:
- 0.2mm layer
- 0.4mm linewidth
- 3 walls
- rest up to you
- material doesnt matter
print the parts in the orientation provided.
With a lot of feedback from reddit i updated the original design. here are the main changes to the version 1 (rev 3.1 30.1.2023):
- hinged design
- place for new AND used blades
- formlocking design of the blades
- space for up to 10 blades on each side
- drain holes
- print in place design