Receiver for "Print in Place Dice Tower"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a catch tray/ receiver tray for the Print in Place Dice Tower by rcmz. It is designed and tested to stop D20s.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 396
- Wydruki
- 6
- Wyświetlenia
- 2032
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This print was designed and tested to stop d4-d20 dice. I have run most size of dice down the tower and find it stops find.
Please note that the tower I used and the receiver I used were printed at 90% their original size. They were scaled down in Prusa Slicer and printed on a Prusa Mini+ with PLA by PolyTerra in the Marble White.
I use a glue stick to make the print stay but really should print without.
Please I am open to feed back and like to tinker with designs so it helps.