1 / 1
Receiver for "Print in Place Dice Tower"
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a catch tray/ receiver tray for the Print in Place Dice Tower by rcmz. It is designed and tested to stop D20s.
- Rating
- 5 / 5
- Likes
- 86
- Downloads
- 396
- Makes
- 6
- Views
- 2,032
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This print was designed and tested to stop d4-d20 dice. I have run most size of dice down the tower and find it stops find.
Please note that the tower I used and the receiver I used were printed at 90% their original size. They were scaled down in Prusa Slicer and printed on a Prusa Mini+ with PLA by PolyTerra in the Marble White.
I use a glue stick to make the print stay but really should print without.
Please I am open to feed back and like to tinker with designs so it helps.