1 / 4
Extende Lift of Hinge for Voron/2020 Extrusion
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix for 4mm Acryl + 3-5mm D-profile Isolation Tape.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Update1: Changed the Angle Towards the Door to remove a Contact Point i had due to a bend axis. (I used aluminum axis)
I remixed the Hinge Holder Part to accommodate a thicker Acryl Panel with a 3-5mm D-Profile Insulation.
I also made the axle a tighter fit and removed the hole in the side towards the screw.
I attached the F3d file. If you need another height just adjust the one custom parameter to your desired value.