Insert for Articulated Cuttlefish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A beak insert and a magnet insert for the Articulated Cuttlefish model by TechnicaL.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 587
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Articulated Cuttlefish model by TechnicaL has a perfect hole on the bottom for some inserts. My first idea was to make an insert where I could attach a magnet, but my kid thought it would be better to make a beak (how else would the cuttlefish eat).
So I whipped together both.
The intended magnet is 10x3 mm with a screw hole and I used 2.5x10 mm regular flat head screws.
The print setting for the magnet insert doesn't matter too much, but for the best quality for the beak you might consider printing that at 0.1 mm layer height.
The inserts are designed to be press fitted, so the tolerance is pretty tight.
Included there are also insert files for printing the cuttlefish model at 70% (which is the size of the print in the photos).