1 / 7
ADXL345 (standard and BTT) Mount for the Sovol SV06/Plus — zdjęcie 1
1 / 7

ADXL345 (standard and BTT) Mount for the Sovol SV06/Plus

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

ADXL345 (standard and BTT) mount for the printhead and the bed.

Ocena
5 / 5
Polubienia
120
Pobrania
948
Wydruki
18
Wyświetlenia
5678
Oceny
18

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

UPDATE Added v2 (RECOMMENDED)

Changelog

  • Easier to tighten.
  • Accommodates:
  • 3 versions of the mount (see filenames for explanations).
  • The bed spacer now plugs into the mount.

BOM

  • 4 x M3 x D4.6mm x L5.0mm heat set inserts. Anything ≤ L5.0mm will be fine, however.
  • 2 x M3 x L6.0mm bolt.
  • 2 x M3 x L16.0mm bolt.

Print Settings

  • Print without supports.
  • 40%
  • 4 walls
  • 5 bottom and top layers

Notes

  • The bed_spacer is only needed when attaching the ADXL mount to the bed.
  • I'm using the version that requires tapping of the holes.

Sources

All the parts are made from scratch, however, I was inspired by this model.

My Sovol3d related repositories:

Buy me a Ko-fi to support my work.

Tagi