Quick and Dirty Nevermore Pellet Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple air filter using the Nevermore Pellets, a blower and one screw.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 580
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is intended to be a quick test bed for determining the shape and length of the evasé to get even flow thru the filter stack, as well as determine the length of the filter stack. Cannisters stack together and everything connects via threads. One screw to hold the blower.
This can be used for solder extraction or lay it in your 3D printer. In it's current design, it's not intended to be mounted to anything.
See https://github.com/nevermore3d for mounted versions of filter. These typically require more hardware, threaded inserts and magnets to build.
The evasé was designed using this article as a reference. These are typically flat edge designs, here we went to a round profile to use threading to connect things. The thread used is based on a 50mm x 3mm thread, modified for lots of thread allowance/clearance.
Source Files:
- Fusion360 will be released when design is stable
Hardware / materials:
- Activated carbon, Nevermore
- 50mm x 15mm Blower
- See Nevermore recommendations
- http://gdstime.com/product/?98_493.html
- Self tapping screw, #10 x 3/8" or M5x10
Instructions
- Print out the following
- 1 each of evasé and EndCap
- 1 or more of cannister
- Attach blower to evasé, secure with screw
- Optional, seal the blower to evaséwith something like hot glue
- Fill cannisters with nevermore filter pellets
- Cap off cannister with end cap
- Stack more filled cannisters as needed
- Attach cannister stack to blower evasé
- Wire as needed