Stage Wall Quick Release Leg Brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket that I use to mount a 2x4 leg to the rear of a stage wall.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a quick release brace that I use when designing stage walls for a local children's theatre. The wall is framed using 1x4x and the brace screws directly to the frame. A 2x4 with a 30 degree cut on the top and a 60 degree cut on the bottom is inserted into the brace and then a ½" hole is drilled through the leg. The included pin is inserted and used to lock the leg into the brace. (See images for more detail) Additionally, a ½ dowel can be used in place of the printed pin.
Printed in PLA with 4x wall layers and 20% infill.