1 / 4
Universal Phone Mount for IKEA Tertial Lamp for tabletop birds eye filming by Billie Ruben — zdjęcie 1
1 / 4

Universal Phone Mount for IKEA Tertial Lamp for tabletop birds eye filming by Billie Ruben

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a phone mount for IKEA Tertial lamp.

Ocena
4,833 / 5
Polubienia
88
Pobrania
185
Wydruki
4
Wyświetlenia
2286
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

This is a phone mount for IKEA Tertial lamp. It allows you to film in a birds eye view, looking down at a table, with the added advantage of built in lighting.

Great for craft videos or streaming lecture notes.

These lamps are usually sold for less than $15, and are pose-able:
US: https://www.ikea.com/us/en/p/tertial-work-lamp-with-led-bulb-white-60424987/
AU: https://www.ikea.com/au/en/p/tertial-work-lamp-dark-grey-50355442/

My phone was a little heavy so I doubled up one of the springs on the top, taking a spring from another lamp.

The model also has a slot for an M3* 35mm bolt and nut to tighten it to the lamp (this is kind of optional, it will still hold without, but it offers extra security).

Another optional extra is an elastic band, to add a little extra security in case you bump the light.

Print instructions

Category: Mobile Phone Summary

This is a phone mount for IKEA Tertial lamp. It allows you to film in a birds eye view, looking down at a table, with the added advantage of built in lighting.

Great for craft videos or streaming lecture notes.

These lamps are usually sold for less than $15, and are pose-able:
US: https://www.ikea.com/us/en/p/tertial-work-lamp-with-led-bulb-white-60424987/
AU: https://www.ikea.com/au/en/p/tertial-work-lamp-dark-grey-50355442/

My phone was a little heavy so I doubled up one of the springs on the top, taking a spring from another lamp.

The model also has a slot for an M3* 35mm bolt and nut to tighten it to the lamp (this is kind of optional, it will still hold without, but it offers extra security).

Another optional extra is an elastic band, to add a little extra security in case you bump the light.

Print Settings

Printer Brand: Anycubic

Printer: Kossel

Rafts: No

Supports: No

Resolution: .3

Infill: 15

Tagi