Gaggiuino - Rancilio Silvia Touchscreen Housing (replaces water tank lid)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of Loogle's Gaggia Classic housing to make it fit on an Rancilio Silvia
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 2543
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a remix of Loogle's Gaggia Classic / Pro touchscreen enclosure. That model is a remix of a project from LikeableBump. Consider visiting these projects and liking them!
https://www.printables.com/model/280617-gaggiuino-gaggia-classic-pro-touchscreen-housing-a
https://www.thingiverse.com/thing:5236286
Updates
13/2/2023: Changed the model to fit the tank better. Had to remove the tamper holder.
Hardware
- 2 M4x10 button-head screws
- 2 M4 nuts
- Loctite 242/243 or equivalent
Attaching the lid:
- Cut a piece of 1.75 mm filament with 5-10 mm extra length and use a heat gun to straighten if necessary
- Thread filament through the plate and lid holes and check that the lid rotates freely
- Melt one end of the filament to the plate with a soldering iron
- Cut the other end of the filament so there's about 1 mm extra sticking out of the plate to melt
- Melt other end of the filament to the plate with a soldering iron.
- File melted areas flush if necessary.
Recommended Print Settings:
PETG (preferred) or PLA, 0.4 mm nozzle, 0.2 mm layers, 30% infill, supports may be needed
Print settings:
Bambu Lab P1P
123-3D Black PLA (prefer use PETG)
0.2mm layers
215C nozzle
65C bed
20% infill (grid)
Supports: yes
Skirts: 5mm
