1 / 3
Truck Canopy - Fold down window keeper — zdjęcie 1
1 / 3

Truck Canopy - Fold down window keeper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cleets to use paracord for window supports so the window does not put all the stress on the hinge when down.

Ocena
0 / 5
Polubienia
1
Pobrania
16
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Cleets to attach to your fold down window in your truck canopy. This provides support so your window can be partially held open to vent your canopy.

Tie a loop at the top so you can disconnect the cord for cleaning the window.
I used a half hitch at the bottom so the line does not rotate when dropping the window open.

Best installed in pairs. I installed these off to the sides and you don't see them when looking in your rear view window.

I used 3M VHB double sided tape to mount these(see pics for locations).

I also sanded the bottom of the cleet and wiped down with IPA before adding the VHB tape.

Wipe down area where you will install this in your canopy with IPA.

Print (4) cleets with PETG and five perimeters and at the high end of the PETG scale for durability.

Tagi