1 / 3
Truck Canopy - Fold down window keeper — image 1
1 / 3

Truck Canopy - Fold down window keeper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cleets to use paracord for window supports so the window does not put all the stress on the hinge when down.

Rating
0 / 5
Likes
1
Downloads
16
Makes
0
Views
322
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Cleets to attach to your fold down window in your truck canopy. This provides support so your window can be partially held open to vent your canopy.

Tie a loop at the top so you can disconnect the cord for cleaning the window.
I used a half hitch at the bottom so the line does not rotate when dropping the window open.

Best installed in pairs. I installed these off to the sides and you don't see them when looking in your rear view window.

I used 3M VHB double sided tape to mount these(see pics for locations).

I also sanded the bottom of the cleet and wiped down with IPA before adding the VHB tape.

Wipe down area where you will install this in your canopy with IPA.

Print (4) cleets with PETG and five perimeters and at the high end of the PETG scale for durability.

Tags