Handschuhtrockner | Glove Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Remix of the glove dryer by gadgetmind I drawed the top with Fusion 360 and made the top a bit thicker,…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 2069
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.
use base and glove insert .stl from original source files by gadgetmind
Print instructions
Category: Hobby Summary
This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.
use base and glove insert .stl from original source files by gadgetmind
Print Settings
Printer: Zaribo 320
Rafts: Yes
Supports: Yes
Resolution: 0.3
Infill: 20%, gyroid
Filament: Extrudr, Prusament GreenTec Pro, PC, Flex blue, black, green
Notes:
If you print the screws, use a layer thickness of < 0.15mm and an infill of 100%