Handschuhtrockner | Glove Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Remix of the glove dryer by gadgetmind I drawed the top with Fusion 360 and made the top a bit thicker,…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 62
- Makes
- 0
- Views
- 2,069
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.
use base and glove insert .stl from original source files by gadgetmind
Print instructions
Category: Hobby Summary
This is a Remix of the glove dryer by gadgetmind
I drawed the top with Fusion 360 and made the top a bit thicker, reduced the capacity to one pair of gloves and added a hole for a switch.
Also made rubberfeet for the base.
use base and glove insert .stl from original source files by gadgetmind
Print Settings
Printer: Zaribo 320
Rafts: Yes
Supports: Yes
Resolution: 0.3
Infill: 20%, gyroid
Filament: Extrudr, Prusament GreenTec Pro, PC, Flex blue, black, green
Notes:
If you print the screws, use a layer thickness of < 0.15mm and an infill of 100%