xTool D1 Alignment for Honeycomb 400 x 400
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a 400x400 honeycomb but could not find some feet to align it to my xTool D1. So I designed them. I made two…
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 187
- Wydruki
- 2
- Wyświetlenia
- 1763
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have a 400x400 honeycomb but could not find some feet to align it to my xTool D1.
So I designed them.
I made two versions.
Version 1 - It aligns the honeycomb centered.
Version 2 - It aligns the honeycomb a bit lower to the center.
This optimizes the working area a bit.
The holders also have some holes to put your pins in or to fix the holders to a plate.
I added a 2mm space between honeycomb and steel plate for better ventilation.
Printing these thingies is pretty easy. You can also dispense with infill what makes this print a bit faster.
In my experience you get the best print results if you print it upside down, to get a nice and clean surface to the 1mm steel baseplate.
Category: Other