xTool D1 Alignment for Honeycomb 400 x 400
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a 400x400 honeycomb but could not find some feet to align it to my xTool D1. So I designed them. I made two…
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 187
- Makes
- 2
- Views
- 1,763
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have a 400x400 honeycomb but could not find some feet to align it to my xTool D1.
So I designed them.
I made two versions.
Version 1 - It aligns the honeycomb centered.
Version 2 - It aligns the honeycomb a bit lower to the center.
This optimizes the working area a bit.
The holders also have some holes to put your pins in or to fix the holders to a plate.
I added a 2mm space between honeycomb and steel plate for better ventilation.
Printing these thingies is pretty easy. You can also dispense with infill what makes this print a bit faster.
In my experience you get the best print results if you print it upside down, to get a nice and clean surface to the 1mm steel baseplate.
Category: Other