1 / 10
Clamp Tablet holder for treadmill
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tablet rest for a treadmill that does not have one, the angle can be adjusted so will work on any large enough surface
- Ocena
- 4 / 5
- Polubienia
- 43
- Pobrania
- 211
- Wydruki
- 1
- Wyświetlenia
- 2027
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (63)Powiązane
Print Instructions:
- The large clamp part were printed at 40% infill
- clamps should be printed with the circular pattern facing the bed for best strength, causes thread to be a bit messy but will still work
- Tray and Tray Body 30%
- Bolts and Nut were 15% but I recommend higher on the clamp bolts
- All parts printed at 0.2 layer height
- Pictured parts were printed in PETG (galaxy black & prusa orange)
Build instructions:
- Tablet tray is in 2 parts
- use m3 threaded inserts on the body
- use m3 8mm bolts to attach the tray to the body
- Pictures only show 2 bolts due to me not inserting the the insets correctly, the uploaded model has been adjusted to make that process easier
- Assemble rest as pictured, threads may be a bit tight but will wear in