1 / 10
Clamp Tablet holder for treadmill
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tablet rest for a treadmill that does not have one, the angle can be adjusted so will work on any large enough surface
- Rating
- 4 / 5
- Likes
- 43
- Downloads
- 211
- Makes
- 1
- Views
- 2,027
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print Instructions:
- The large clamp part were printed at 40% infill
- clamps should be printed with the circular pattern facing the bed for best strength, causes thread to be a bit messy but will still work
- Tray and Tray Body 30%
- Bolts and Nut were 15% but I recommend higher on the clamp bolts
- All parts printed at 0.2 layer height
- Pictured parts were printed in PETG (galaxy black & prusa orange)
Build instructions:
- Tablet tray is in 2 parts
- use m3 threaded inserts on the body
- use m3 8mm bolts to attach the tray to the body
- Pictures only show 2 bolts due to me not inserting the the insets correctly, the uploaded model has been adjusted to make that process easier
- Assemble rest as pictured, threads may be a bit tight but will wear in