Funnel_Desiccant Container - Filament spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do you want to modify a design and don't know how. We can help and often work for free, email us to ask.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 95
- Wydruki
- 7
- Wyświetlenia
- 496
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom
I have found in the past that I want to fill the spool desiccant containers in a tray so that any beads that fall through the core don't get lost on my desk or floor. I don't normally have anything suitable in my office so I designed this funnel one afternoon when cleaning up my printer.
It is designed to fit neatly over the top of the container while the center is covered to prevent beads getting in there. The also makes filling extremely easy and quick.
I found a neat little trick is the supports for the core cover also act like a rake when the funnel is twisted ensuring that no beads are going to fall out when the funnel is removed. Or showing you that there is to much. If the rakes are pushing beads around there are to many. In which case the container and funnel can be picked up together and poured back into the source container.
Print instructions
Category: Containers Summary
Do you want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact details on our webpage.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom
I have found in the past that I want to fill the spool desiccant containers in a tray so that any beads that fall through the core don't get lost on my desk or floor. I don't normally have anything suitable in my office so I designed this funnel one afternoon when cleaning up my printer.
It is designed to fit neatly over the top of the container while the center is covered to prevent beads getting in there. The also makes filling extremely easy and quick.
I found a neat little trick is the supports for the core cover also act like a rake when the funnel is twisted ensuring that no beads are going to fall out when the funnel is removed. Or showing you that there is to much. If the rakes are pushing beads around there are to many. In which case the container and funnel can be picked up together and poured back into the source container.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2
Infill: Anything
Filament: Prusa PLA White
Notes:
Infill is negligible as there is not much of a cavity.
Supports are required as the core cover and its supports are not on the print bed.
How I Designed This
I designed this in Fusion 360 using the desiccant container as the dimensional reference.