RetroBlaster N64 Adapter Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dust cover for the N64 adapter used with your RetroBlaster cartridge programmer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This .stl file should be printed as is with typical settings. Minimum supports needed that release easily. This is for use with the RetroBlaster programmer N64 Adapter by RetroStage. The dust cover simply slides over the adapter, fits snug but not tight, as in it won't fall off if you tip it over, but is easily lifted off of the adapter with minimum effort.
Mine was printed on an Ender 3 V2 Neo. If you end up making your own please post a picture! I think you can upload them to this page somehow, but I'd love to see your prints.
