Star Adventurer/GTI replacement vixen adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is an adapter to replace the original vixen clamp with a better one that does not destroy your dovetails. You
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 979
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Do you hate the original vixen clamp that is on the Star Adventurer and Star Adventurer GTI ?
This could be the solution for you.
This model is an adapter to replace the original vixen clamp with a better one that does not destroy your dovetails. You only need the vixen clamp below, 4 M5 nuts and bolts as well as the original screws on your SWSA, it's a really simple modification.
It is designed for this clamp I found on aliexpress :
The tolerances are not the best as I do not have the best modelling skills nor measuring tools.
I printed it with 50% infill with a strong PLA - it is strong enough to hold my WO ZS61II with autoguider and EAF.
Please test it thoroughly before putting it to use, and I can't guarantee it will not break - be careful.