Star Adventurer/GTI replacement vixen adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is an adapter to replace the original vixen clamp with a better one that does not destroy your dovetails. You
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 68
- Makes
- 0
- Views
- 980
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Do you hate the original vixen clamp that is on the Star Adventurer and Star Adventurer GTI ?
This could be the solution for you.
This model is an adapter to replace the original vixen clamp with a better one that does not destroy your dovetails. You only need the vixen clamp below, 4 M5 nuts and bolts as well as the original screws on your SWSA, it's a really simple modification.
It is designed for this clamp I found on aliexpress :
The tolerances are not the best as I do not have the best modelling skills nor measuring tools.
I printed it with 50% infill with a strong PLA - it is strong enough to hold my WO ZS61II with autoguider and EAF.
Please test it thoroughly before putting it to use, and I can't guarantee it will not break - be careful.