Spool holder for dry box, narrow, vase mode, fast print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spool holder was designed to consume the least space in your dry box and to print very fast and material saving
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This spool holder was designed to consume the least space in your dry box by leaving the least possible space between 2 spools. Therefore one more spool might fit into the box.
It prints very fast and material saving by using vase mode.
Material needed
4 x Dryboox_spoolholder_V0R001_with_patch.stl
4 x per spool: ring.stl (Copy from Holspeed → see linked original source)
Buy
2 x 6mm Tube
4 x per spool: 608 bearing
I printed my in PLA with a 0.4mm nozzle, vase mode and 0.65 mm extrusion width in order to make it a little bit more stiff.