1 / 1
Microcentrifuge Tube Thermo Shaker lid — zdjęcie 1

Microcentrifuge Tube Thermo Shaker lid

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lid for Grant PMHT PSC24N shaking incubator, to help regulate the temperature of your microcentrifuge tubes

Ocena
0 / 5
Polubienia
5
Pobrania
27
Wydruki
0
Wyświetlenia
398
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a lid for Grant PMHT PSC24N thermo-shaker microcentrifuge (Eppendorf) tube incubator. It's handy for keeping tubes nicely heated and/or minimising environmental contamination if you're using open tubes.

Two models are attached, a standard version (45 mm, fine for normal 1.5 mm tubes) and a tall version (55 mm, good for 2 mL eppis or if you have columns/inserts in your tubes). The technical drawing is for the tall version. I've printed in Prusament PETG and the model is robust on a shaker running at 95C for extended periods. I printed with a 0.4 mm nozzle and 0.2 mm layers, but this should also be fine with a larger nozzle for a quicker print.

Tagi