Microcentrifuge Tube Thermo Shaker lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lid for Grant PMHT PSC24N shaking incubator, to help regulate the temperature of your microcentrifuge tubes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
This is a lid for Grant PMHT PSC24N thermo-shaker microcentrifuge (Eppendorf) tube incubator. It's handy for keeping tubes nicely heated and/or minimising environmental contamination if you're using open tubes.
Two models are attached, a standard version (45 mm, fine for normal 1.5 mm tubes) and a tall version (55 mm, good for 2 mL eppis or if you have columns/inserts in your tubes). The technical drawing is for the tall version. I've printed in Prusament PETG and the model is robust on a shaker running at 95C for extended periods. I printed with a 0.4 mm nozzle and 0.2 mm layers, but this should also be fine with a larger nozzle for a quicker print.