Counting matching models…
This is a simple frame to fit around a wifi thermostat (can be found on Aliexpress) The model I have is a Beok Tuya WiFi Heating Thermostat My previous thermostat was wider and there were marks on the wall so this covers it up and covers…
If you have an older Danfoss thermostat with broken tabs, this model may help repairing the thermostat so you can use it again. If any of the tabs remain, you will have to cut them off and grind/polish the surface the tabs was on. On the…
Easy to print. Dont use vase mode.
Scale Model of Thermo Fisher Orbitrap Astral MS
Scale Model of Thermo Fisher Dionex Ultimate 3000 LC
See my collection for other Thermo models
By attaching it to the hinge, the position of the thermo-hygrometer can be varied. This way, you can measure the temperature at the upper or lower hinge without needing any additional mounting holes. Suitable hinge:…
Material - Atomic Filament Carbon Fiber PETG (Ideal for UV Resistance and Ductility) Other materials: PETG, ASA, ASA-CF, ABS, PLA (PLA may be too brittle for clamps) Nozzle: 0.50mm Bed Temp: 85c Hotend: 255c Extrusion Multiplier: 0.90…
This part is a holder for placing the “Krontaler” thermo-hygrometer inside an enclosure or a filament storage box. By the way, this ALDI-hygrometer can measure humidity from 20%, unlike some other models which start measuring only from…
Twist Ring Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU.
Snake Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
Standard Hinge Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
Rose Thermorph. Put into 70°C water and let it morph. Printed in dasFilament PLA and Fiberlogy 40D TPU. Sliced in OrcaSlicer 2.2.0
This is a remix of @Raymond's ‘ Hygrometer house for Prusa Core One’ but instead of using the 20x5x2mm or 20x6x2mm magnets this uses (up to*) four 6x2.5mm round magnets (other magnets will work as well, like 2-3mm in height is confirmed…
DEUTSCH Heizungs-Thermostat für einen Shelly 1 mit Sensor-Shield und einem AM2302 Temperatur- und Luftfeuchtigkeits-Sensor. Wandmontage, Unterputz. Der Shelly kommt in die Unterputzdose, der Sensor in das Gehäuse. ENGLISH Heating…
Ein Halter für den Innenraum des Core One der nicht im Weg ist, aber wenn nötig auch schnell entfernt werden kann. Benötigt wird: 2 Magneten (Durchmesser 6 mm, Stärke 3 mm)…
I was inspired by this deisgn https://www.thingiverse.com/thing:6100697 thing is, i don't like the fact that i need to print it with support, so i made my own i also chose to use 6x2mm magnet, which are also used in the gridfinity project…
LED thermometer build guide. There are two versions of this thermometer. An LED illuminated bars Type and an open strip LED type. Both have the same software installed and a photo cell to control the LED intensity.
IKEA FANTAST Thermometer has a long cord for its metal probe. In my kitchen, it was always an unruly bit of clutter. Here is a simple print to keep thermometer and its cord and probe together until it is time to use them. In the…
Developed by the Aquatic Germplasm and Genetic Resources Center (AGGRC), the Vial Thermocouple Fastener (VTF) is designed to securely fasten thermocouples to Matrix cryovials, enabling precise and consistent temperature monitoring during…
This square mount is specifically designed for Thlevel model . The device snaps perfectly into the mount, staying secure while remaining easy to remove. Questo supporto quadrato è realizzato appositamente per il modello Thlevel . Il…
Hier habe ich ein Adapter für Smarte Homekit Thermostate gemacht. Ebenfalls mit druckbaren PIN. Als Vorlage habe ich ein gekauften “Adapter” genommen. Am besten mit ABS/ASA drucken wegen den Temperaturen an den Heizkörpern Viel spaß damit…
A science teacher at my school asked if I could design a simple thermometer holder that would clip onto the edge of a beaker and hold the thermometer upright. She showed me one in a science equipment c catalog for about $10 each. I told…
Last year, I bought some Tado radiator thermostats to give me better control over my heating in winter. The problem was that when I first installed the M28x1.5 radiator valve coupling, I tightened the screws too much. After about a week,…
This simple model allows to put the Sonoff SNZB-02D inside your ACE Pro
I have downloaded many models designed by others, and they have quite a few flaws—for example, requiring extra screws or having an inconvenient viewing angle. That’s why I designed this model. This is Thermohygrometer Casing 3D Model. No…
Stand for cheap thermometer / hygrometer that replaces LR44 batteries with single AAA battery as power source. Thermometer / hygrometer module can be bought on aliexpress, amazon etc. Variant with and without sensor mounted on the cable…
Stand for round mini hygro- thermometer (4.5cm / 1.77", chinese models) Can be printed without support. In this case the inner top overhangs can get a bit grubby but this doesn't mind much because the hygrometer devices covers the little…
Tired of the suction cup always falling off the fishtank glass?
Im Zusammenhang mit dem Bau eines Druckergehäuses ( PrintClosure-Projekt ) habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Die Abmessungen des Ausschnitts betragen 46,5 x…
Small model to mount the ThermPro thermometer TP357 on an IKEA Skadis board. Print right side up and use supports for the hooks.
This is a prototype for a thermo to drink coffee ot tea The objetive is include a magnetic spoon on the thermo, it will be a option to don't forget the spoon To assemble the lid with the glass, it's necessary use a piece of filament The…
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
Replaces the original holder for external TFA sensor temperature and humidity. The sensor is simply inserted from above, easy and secure.
Support for your filament coils that incorporates an integrated reservoir for silica gel balls and with a slot for a rectangular thermometer hygrometer with dimensions of 47.5 x 28.5 mm. It consists of three separate parts: The chassis…
Thermoformed 3D hearts for treats or trinkets. These are printed flat, then shaped using a heat gun. Printing Instructions Heart Base: PETG, ABS, or other heat-resistant filament Hearts: PLA (with or without hanger) File is pre-configured…
Hello, This is my first 3D model I've created on Tinkercad. It could definitely be better, and any suggestions are welcome. I could also edit it with, for example, the first letter of your name, or, if the Tado V3 is in the bedroom, with…
I wanted a simple stand to have my polypipe thermostat stood up on the sideboard, so I made one. It slots in pretty nicely too - enjoy!
In my short experience with Sy's Peglock System, I have found that things that don't have a contact surface high enough above the hook attachment can be knocked loose if rotated up. Extending that area a bit prevents it from rotating…
This standoff shell allows placing the wall mount for the DIYLESS Thermostat 3 on the wall instead of recessing it into the wall. There are ventilation holes in the top and bottom. The back of the mount sits flush with the wall. Change…
Thermometer/hygrometer stand with 40 mm diameter. Printed with PLA. No supports needed.
Im Rahmen des PrintClosure-Projekts , bei dem ein Druckergehäuse gebaut wurde, habe ich diesen Einbaurahmen entwickelt. In den Rahmen kann das digitale Thermometer-Hygrometer eingeklipst werden. Der Ausschnitt hat die Abmessungen 46,5 x…
Xiaomi Mi Temperature and Humidity Monitor 2 Stand Elevate your smart home setup with this clean, functional desk stand. This design transforms the small Xiaomi sensor into a stylish desktop or shelf accessory, improving visibility while…
A sleek and functional stand designed to keep small indoor thermometers upright for better visibility and accurate readings. Material: PLA Infill: 20% Supports: No
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
Update: wasn't printing because of the thin starter edge. Modified to have a flat bottom.
Google Nest Thermostat Base Cover Plate Super basic. For Nest Thermostat (latest 2026, cheaper version). Don't actually like this, but wall was mangled behind the thermostat mounting area so it makes things look clean. Approximate ~1hr…
Das Model verkleinert das Topfvolumen. Beim Zerkleinern von kleinen Mengen wird das Gut nicht mehr im ganzen Topf verteilt. Ich habe das Model mit PETG ausgedruckt.
The purpose of this design is to block the light coming from the thermostat at all times. It is convenient when the thermostat is placed in the bedroom, for example.
A stand for an analog humidity thermometer on the table. The mounting diameter is 50mm
The Chair 209 , a design classic, continues to be manufactured using traditional craftsmanship by the family-owned company Thonet. Its characteristic, elaborately bent wooden components are created by steaming different types of wood and…
This is a base for the Braun Thermoscan 7 and probe covers. This is intended to be filled with sand or salt after printing to give the base some extra weight. Print Recommendations I printed these in PETG with a 0.4mm nozzle, and filled…
This is a remix of Morik's stand. It is longer and a bit wider so that the MJWSD06MMC fits well too. Printed with PLA grey and standard setting.
This is a thermometer clip for standard beakers. It hold a thermometer in place. The clip fits on most beakers between 200 ml and 1000 ml. It is used in science class for kids and the clips are much cheaper than a new thermometer ;-)
A simple kinda hidden wallmount for Sonoff SNZB-02LD Zigbee smart thermometer with four embedded magnets and screwholes Magnet size: 6x2mm and there is four holes for them, you might get away with only two magnets but i went with four.…
Good Display GDTHT019 E-paper thermometer and hygrometer is not designed to be placed on a table or shelf. That's why I created a model that allows it to be placed on a stand. The model is in two parts to make printing easier. The two…
Simple clip to mount your thermo-hygrometer directly onto 16 mm grow tent poles. Secure fit, clean positioning, easy to read. Use PETG for flexibility and crack resistance.
A little stand for the standard LCD Hygrometer or Thermometer you can find in many onlineshops. Easy to print with the face on the print. Tip: For a cleaner look, print it in PLA-CF. It offers a matte finish
Thermometer holder for Prusa CoreOne / + / L printer for direct control of temperature and humidity in the chamber. The thermometer is readable even through the door. Insert the thermometer into the printed part. Use the nylon rivet left…
Obudowa do termometru xiaomi. Obudowę można wykorzystać do pojemnika na filament. Simply drill two mounting holes in a transparent container and place one part outside and the other inside. Then, simply insert the thermometer into the…
Thermos Modular Drying Station Tired of bad odors in your thermos after washing it? I designed this modular drying station because I was frustrated seeing how, day after day, my partner’s thermos never dried properly after work. Placing…
Usually we refill our tip boxes, but sometimes when buying filtered tips or other specialty tips they come in sealed boxes. Instead of sending these boxes straight to recycling, I designed a set of inserts that give them a second life in…
Surface-mount box for thermostat A practical 86x86x34 mm box for smart thermostats. Print this box if you don’t have a built-in box; it’s perfect for thermostats—in this case, BEOK—but there are many others with an 86x86 mm box size and…
Ring holder for thermometer/hygrometer to fit in 44 mm diameter hole.
Prusa CORE One (Plus) Hygrometer - Thermometer mount above the rear fans (press fit) illuminated by the original LEDs Place on top of the backside fans (middle position, press fit on the fan mount screws), can be easily removed, does not…
This ultra-stable Tado Smart Thermostat stand is the perfect solution for users who prefer desk or shelf placement over wall mounting. While many existing designs feel flimsy, this model features a precision-engineered fit and a weighted…
Trinkflaschen Thermoskannen Halter Lager für Fahrrad Trinkflaschen und EMSA Senator Thermoskannen.
Einfacher kompakt Halter für ein ThermoPro TP-16 Fleischthermometer/Bratenthermometer.
This is a replacement cap for the thermos bottles, that come with the Aalto Kit for the teaching assistants of Aalto University. I recommend printing with a food safe material, and for example acetone vapor smoothing the print afterwards…
3D printed parts for the NastyThermostat project — a mechanical controller that automates a Nest Gen2 thermostat using a stepper motor and GT2 belt. No cloud, no API, fully local. This set includes 3 parts: GT2 Pulley 138T — attaches to…
Wolltet Ihr schon immer mal realistisch mit der Jugendfeuerwehr oder der aktiven Truppe üben, hattet aber keine Wärmebildkamera zur Verfügung?! Hier die Lösung: Dieser Umbausatz ermöglicht es Euch, die relativ günstige Technik der DIY…
Ihr habt Euch meinen Umbausatz für die DIY Thermocam V2 gedruckt und wollt die vielen Stunden Arbeit jetzt gut geschützt lagern? Kein Problem, hier die Lösung: Diese extra auf Maß angepasste Box ist stabil und sogar relativ wasserdicht!…
A few months ago I bought some thermometers for $2, from the miscellaneous junk section of a local supermarket. I installed one outside my back door. Unsurprisingly it failed during a windy day. I didn't want to bin it, so I made up a…
il s'agit du verrou à douille du système de fermeture étanche de mon mug thermos. ATTENTION : à imprimer obligatoirement en PETG alimentaire.
This is a structural housing and needs to be printed as such. I use 3 loops 4 layers and 100% Gyroid infill Recommend to invert for print quality
Added a chamfer to fit the IKEA 365+ 10.6L box and spacers to sit securely between the legs of the IKEA 365+ drybox project. It's made for the ThermoPro TP157 thermometer which is nice and compact and most importantly uses AAA batteries…
I create a Version with FreeCAD for Redline Filament Spool.
Kabel aufrollen drucken wie auf dem Bild angezeigt, die Feder ist von einem alten Kugelschreiber. Habe das Innenleben Komplett überarbeitet, lässt sich jetzt Problemlos aufrollen Neu hinzugefügt: Boden mit 3mm Löcher für die Wandmontage
This cap for the Cooler Master Elite Liquid Cooler has a holder for a small thermometer on the outer cover of the CPU Assembly I designed this model after this thermometer from Amazon…
Trim Plate for the Google Nest Thermostat (4th gen)
Spritzschutz für den Thermomix. Passt in den Verschluss zum Aufbewahren. Gedruckt in PCCF mit 0,15mm Balanced Profile. Um 90 Grad gedreht drucken damit mehr Stabilität gegeben ist.
This housing is sized for Acurite outdoor temperature transmitters. I printed this in white ASA for UV resistance and minimal solar heating. The module is held inside by a 50mm M3 screw inserted in the base. An M3 heat set insert is…
Thermomix TM7 Weighing Plate The weighing plate automatically aligns itself on the Thermomix. The centering ring prevents it from slipping on the device. Printed from matte black PLA with 15% Gyroid Infill Plate-Diameter 200 mm Thermomix…
This is a CAD model of a Mini Hygrometer Thermometer (Digital Humidity Meter) that I designed in Shapr3D, based on a real product I own. It's a small indoor/outdoor humidity and temperature monitor often used in greenhouses, gardens,…
A set of fasteners for installing the FilaPartner E1 dryer on a thermo-box.
3D Printed Case for Mercury Medical Thermometer This 3D printed case is designed to safely store and protect a traditional mercury medical thermometer. The case helps prevent accidental damage and reduces the risk of breakage during…
As the Thermomix TM7 is an expensive product, I want to protect the display while using it, just like a smartphone display. Thus the bumper stays always on. For my final cover I used the Bumpmesh tool by @CNCKitchen…
A circular wall plate for the Nest Thermostat. There are 3 sizes available (160mm, 120mm & 80mm).
