Counting matching models…
For bambulab users: you can find the model including print profiles here on makerworld . I wanted a drill press for my Dremel, as well as a dedicated press for installing heat-set inserts with my soldering iron. Since there are already…
Be one of ten who leave a Like at Printables and support me with it :) Prevents cable breakage at the housing outlet and rubbing on the Y-axis motor. It can be attached to the underside of the housing and to the recess for the stepper…
Bau einer beheizten und aktiv belüfteten Filament Trockenbox. Gesteuert durch einen Arduino Nano. Gebaut aus einer Ikea365 10,4L Vorratsbox, ein paar elektronische Teile und ein paar Teilen aus dem 3D-Drucker. Alle Teile sind leicht zu…
Ender 3 S1 Pro Heated Bed Cable Chain. This chain link provides the offset needed from the heated bed to the printer. I used a little bit of Automotive black silicone to adhere the bottom part to the machine. You need to print: 1x…
Notice! This is only compatible with Python for the original AMS. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
As of now, the (Un)original Dryer D2 is available. It is an improved version of this drybox, with many new features. Now supporting modular heating, filament weighing, and is much easier to assemble! Check it out here: Disclaimer: This…
This model might not be strictly needed to prevent the wires from being damaged as they are pretty beefy, but having all the wires on the printer match is fun! The design uses 17 ChainLatches, 17 ChainLinks, 1 ChainEnd, and 1 ChainStart.…
I decided to build this mod for the CFS just to see if it could be done. Like many of you, I received the Space Pi dual roll filament dryer with my K2 Plus preorder. I have multiple other filament dryers, and really no use for another…
The front edge of the print plate should sit 38mm behind the front edge of the frame so here is the jig for that.
Updates: After printing mine, I realized my 6mm x 2mm magnets were too weak. The heater is held to the wall but uses the power cord to stay up, added a 10mm and 8mm magnet version Added a clearance hole for the heater button Added a 2mm…
This is one of the first accessories I designed for my S1 Pro. If you own one you probably know what this is for. I've been using this for a year and I have none of the typical cable insulation damage nor have I ever grabbed the y-axis…
The COREBOXX Semi-Smart is an advanced electronic upgrade for your filament storage system, enhancing usability, safety, and functionality. This modular system integrates filament chamber heating, real-time monitoring, and quick control…
Certain times through a print I noticed the cable catching on the corner of the power box, with a slight bump as the bed pulled it over. This clip just ensures a forced direction for the cable which does not interfere with the power box.…
The Creality Ender 3 comes with minimum thought put into the cable management aspect of the machine. This could lead to broken and shorted wires, or cables getting caught on other components of the machine leading to damage or print…
The Ender 3 S1 Plus has a slightly different heat bed cable positioning (and it's also bigger), so I mirrored the offset chain link to fit the specs. I also recommend printing the cable bracket link laid down with minimum support. I…
An updated bracket for the Adafruit Heated Insert Press (https://learn.adafruit.com/heat-set-rig) The original bracket requires 4 screws to hold the top plate in place. I wanted to be able to remove my soldering iron quickly without tools…
This mod allow you to install two additional Fans under the bed. I am getting about +10°C 4x M3 Inserts.. to mount the Fans. (Voron BOM) 2x M3x8 (Voron BOM) 2x T-Nuts for 2020 Aluminum Extrusion (Voron BOM)
This vent design adds a curved lip to let the lower electronics chamber vent out convection heat through the exhaust port while also giving the heated chamber fan a wide path to vent out toasty air. All while keeping the two from mixing.…
I have been working on this for a while. I didn't want to pay over a hundred dollars for a 4-spool heater that was mediocre in heating the filament. The box is more effective than I thought it could be. When I had 7/9 spools loaded the…
I build the Lack enclosure for my Ender 3 Pro but the cable of the heated bed constantly was bended in weird was at the back panel because a couple of centimeters were missing. My solution is a cable strain relief replacing the original…
Update – Version 1.2 Design Update: Added a lightning bolt icon to represent the power lines. Improved Clearance ("Large Fit"): Transitioned from a "perfect fit" to a "large fit" . The extra room for the rubber grommet and cables makes…
Modification to allow for thick wires on the Prusa Heated Bed Prusa Bear Printer Design by gregsaun https://github.com/gregsaun/prusa_i3_bear_upgrade
Shrinks the footprint of the printer in the y-axis. 60 deg so that x and y cables never rub and decreases strain on cable wrap. Uses stock M3 hardware but screw heads on top making it easier to assemble. This print only works with the…
Reusing the PolyDryer's Hydrometer to monitor the humidity in my enclosure.
Slide it on like the pictures show. Orient the print like the sliced pic, no supports needed. Enjoy
Thanks for sharing from the author Follow me for other drawings that may be useful to you. Happy Printing
Hi! If you have the Balanced Dice ( http://www.thingiverse.com/thing:147883 ), you may need this set of dices. It's a hollow dice with a solid semisphere in one of the inner faces making it unbalanced. Sightly increases the probabilities…
I ported the original arduino software by werner_rh for an Wemos D1 Mini because I wanted to monitor the drying sensor data with grafana. Therefor the sensor data is transmitted via mqtt an transered to influxdb using telegram. The…
I'm not a fan of cluttered handlebars - this mount uses one of the headlight mounting bolts to keep the controller for Oxford heated grips up by the display on the 2023 Tenere 700. I'm not sure if this will work with earlier year models -…
Print in vase mode with bottom layers. Layer width at least 0.6
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
This is a remix of rogerquin 's Cable Strain Relief for SOVOL SV06 3d printer model . It's the same idea as before, this adapter slides into the existing cable cover from the bottom to secure the bed's cable. This remix has been extended…
After some time printing large models spanning the complete printbed, the cable of the heated bed got caught behind the right actuator of the y-axis. This fence simlpy prevents this from happeningnot while being in the way and forcing new…
I don't have M3 Heated inserts so I modified the holes to be threaded M3 holes. Can secure the KUSBA in with M3x4 screws such as https://www.amazon.ca/gp/product/B0B3J35JSS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The original…
The Heated Bed MOSFET Box top opening is too small. This will fix that. Also Includes Wire Grommet. Optional Upgrades to model: Panel Mount Fuse Holder Optional to fuse for LED light circuit. Dust Mesh Filter : create your own filter to…
4inch dryer exhaust duct vent for wall or plywood Drill 102mm diameter hole to insert this. It might work for your heated chamber enclosure.
Print it in PC, PCCF, PA or PACF . Do not print in PLA or PETG because those materials are not compatible with the high temperature of heater. I printed it in Prusament PC blend with 3 walls, 25% infill, 0.2mm layer height and 20 mm of…
Bookmarks based on the book series Game Changers by Rachel Reid . Choose the bookmark of your favorite character from the first two books. #81 Ilya Rozanov - Boston Raiders #24 Shane Hollander - Montreal Metros #21 Scott Hunter - New York…
The original build would have taken too long to print for a next day present, so I rummaged the garage and found an unused standard pvc water pipe. 50cm long , 11cm diameter. With this as a base for a lighthouse I only had to print the…
Anycubic Mega S cable-chain brackets for heated bed cable to avoid constant flexing at the same points, made for a purchased cable-chain with the 3-hole fixing.
A simple modification of the original model by Elegoo to be used with 16 mm silicone spacers instead of stock 7 mm plastic ones. The “open” version allows installation without resoldering of the wires.
Heating tests: without filament roll 50°C - 7 minutes 60°C - 15 m. 65°C - 23 m. with 4 spool 50°C - 20 minutes with error E4
Upgrade your 3018 CNC using TNuts and standardized M3 Heated Inserts. Improve Fixtures and mounting for milling and Laser Etching projects.
I kept breaking this design until i decided to beef it up. I used PETG this time. Also, the mounting flange MUST be 2mm thick. Or else it will throw your bed level OFF big time. DO a bed leveling when your done mounting everything. This…
The ultimate mod from ANSO Suspension remix of the original Hydra PRO - Actively Heated AMS Part list: Liquid Insulating - 1pc Sunon PMD2404PBB2-A 24v - 3pc 24v 280c 80w PTC heater aliexpress - 3pc 36*35*10mm radiator aliexpress - 6pc…
Made it so you can use a fused IEC power connector with a switch and a extended version for more room for power supply cables. Extended power supply case- Power supply case for 50mm psu for (Un)original Prusa Heated Drybox w/ extended by…
The Cable Strain Relief is designed to be placed over the Connector and Zip-tied in-place. I recommend using ABS or you'll have serious issues with warping due to the radiant heat from the bed. I've also included my STEP file if folk want…
While warping it could be that the printbed comes off the magnet and that's someting you don' want to happen. (See .gif video) That's why I made these bed clamps which you can print in PAHT-CF with your bambu lab X1C, you just need to…
I have just added debossed icons to label the buttons on Display 1.stl.
Here's a little creation for fans of Heated Rivalry, featuring the famous phrase “Stupid Canadian Wolf Bird” .
It position controller as much to grip as possible. Cavity and additional holes is for water escape. Maybe overkill but... Requires rubber/silicone band. I've printed one from TPU. Screws: M5x20
A base plate can be useful when printing, threads can be pulled due to the bend, otherwise simply remove with a cutter knife. PLA works PET recommended. If you want to use the model commercially, please contact me.
I had to make this as Lakeland don't offer replacements for this part that always breaks. Hopefully of use to someone, somewhere! I printed in PLA first time around, but it soon melted and warped (those racks get pretty hot!) so next used…
supports are not necessary, but you should have 100% infill.
Using @Jay_27612 PolyDryer's Hydrometer to monitor the humidity in my enclosure & needed the back to lock it on...
I bought some silicone heated bed mounts to replace some of the aging springs on a few of my printers a while back, and during some recent unrelated upgrades, I decided to install some of them. The mounts I bought were in a 16 pack that…
Remix of a remix. Nick remixed the original from Leftcetio and I remixed that version to suit my needs. Uploading to help anyone else who may have 120mm fans but not 40mm or 92mm. Print with at least 2 walls in Inner/Outer config. Only…
This is an assembly that moves the heated seat switches up near the shifter next to the AWC button as I wasn't a fan of the OEM location. This fits in my 2015 Evo GSR and should fit on any other year or trim (although untested). The zip…
I have these heated grips on my bike, but the mounting plate they come with is garbage and doesn't attach on most bikes i've installed the grips in. I made a 22mm bar adapter that works pretty great. Maybe it will work for your bike too.…
Part 3 should be made of TPU, part 4 of transparent plastic
This is a minor remix of Embrace Making's Heated Bed Strain Relief. I simply add holes for M3 heated brass inserts. What size of M3 screws you need will depend on how thick your wire harness is and how big you make your HBSR-Spacer. Use…
45mm Roll Cage Clamp Universal M6 Heated Insert with TPU Gasket Inner is 46mm to allow the 1.5mm TPU to slide inside. to achieve a good clamp. has a M6 Hole for a heated insert. Please someone remix it for a cup gyroscope Cupholder.
Update: Due to popular demand (an astonishing number of 0 downloads), I have updated the file in case you don't have the alu inserts available. Now there's a widened version with no pre-drilling required, and a version for an M4 nut.…
Heated seat control knob (2013-2018 Toyota Avalon) In case you lost yours or destroyed it and don't buy replacement and then accidentally get the back seat knobs even though they say they're universal these are for the front seat only and…
This is a modification for an Ender Extender (400 x 400) with the AC heated bed. The original strain relief included with the kit started to droop / creep after a few months of use, and I did not feel this would adequately protect the…
Filament drying without any extra hardware Now you can use your heated print bed as a filament/desiccant dryer. No need to buy an expensive dryer when you've got one built into your printer! Here are before and after images of when I dry…
Mounts for the Zumo XT (and maybe others?) and Oxford's heated grips for the AdventureSpec Mini Fairing. There's a pocket where an Airtag can be snapped into on the rear of the GPS mount. Mounts to the fairing face using existing holes in…
Conector de la base calefactable de la Prusa MK4 a 90º (Inspirado en “Prusa Mk3 Ring Terminal 90 Deg Heatbed Cable Cove r” de GrubbyZebra), y con el cual se reduce la longitud de la mesa en aproximadamente 30 mm. Impreso en PETG.…
I've designed this part to mount external heated bed mosfet module to my UM2 Clone frame. All mounting holes are for M3 screws (no nuts needed except 2 t-nuts for frame mount). Optional 40mm fan mount included. 24-06-2017 - V2 version…
I wanted to build a heated insert press but only had some 4040 extrusions kicking around. I couldn't find any premade models from it, so I borrowed ideas from multiple sources and made my own. All my M5 bolts were also 2mm short, so I…
This hook features a custom "horn" shape specifically engineered to hold towels, bathrobes, or cloths securely without letting them slide off. Designed to snap or hang directly onto the horizontal tubes of standard heated towel rails, it…
This is a remix of this design: Ender 3 S1 Gulf Coast Bed Cable Raise by Sixpack99 | Download free STL model | Printables.com Absolutely love the original design this is based on. Probably one of my favorite mods for the Gulf Coast…
The original fits very well; however, I want to heat my build chamber—something the U1 isn't designed for. To prevent cold air from flowing in from below, I sealed the holes and increased the thickness of the solid area to 0.9 mm so the…
Ladies and Gents, This is my Heated Bed Upgrade Guide for the Mega Zero v1.0 ! This is in 2 parts, one for the SKR Mini MZ (the easy version) and the Advanced version for the Stock Melzi Board. UPDATED: I've now included a compatible "PEI…
I remixed the part to mount a 150w ptc heating element. I recommend to order a more powerfull fan to have the warm air better circulating, but this is not needed. The parts used are: 24V 150W https://amzn.to/3KyzoTB Regler…
Notice! This is only compatible with Python for the AMS 2 PRO. Please view my other designs for designs supporting other AMS systems, there are plenty. Buy Python I've teamed up with a few different stores around the world offering the…
Auto rewinder A1 A2 beams do not support Prusa Drybox Heated modification, I combined both heated modification of A1 A2 beams and auto rewinder modifications so they would have all necessary adjustments. Please find 3mf file attached.
Cable cover for ender3 fysetc magnetic bed inspired by prusa mk3 design.
Made improvements to the original model so the tolerances would be looser and the box would still shut.
Moved the switch and mount hole locations.
extended model for more room for wires.
I'm mainly using the Medisana HB 675 XXL heated blanket on my desk chair. Since the controller module is dangling from one of the corners of the heated blanket, it was a hassle to change the heating level. It also posed a risk of being…
What has been done: Enlarged the duct tip (12 mm) Angled the top part of the tip to help redirect the flow. Angled the part that goes to the extrusion, so the duct points downwards a little bit more (only the versions that do not say “non…
This simply adds labels to the display, I/O for on/off, up and down arrows for temperature up and down. I am currently working on one that is indented instead of multiple-colored, but the cover is thin. Update 1: Added a STL that is…
This is a rough model. I'd like to clean it up a bit in the future, but so far this works.
Recommend you print this out of a high temp material ABS, PC, CPE-HT, Etc…
Simply added parts/negative parts in Orca to suit my needs. The inserts are ment to be added to the front part with the M3 screws going in from the back. Standard Voron M3 inserts work best but others might work too (read lower part). If…
I recently bought this Inventum heated blanket which came without a nice holder for the controller. So, I fired up TinkerCad, smashed some blocks together, et voilá, the Inventum Heated Blanked Controller Holder (IHBCH for short) was…
See photos to compare adjusted part to original. With the adjusted position it's possible to use the IEC connector with fuse and switch. The hole diameter is set to 4mm. Adjust the negative hole XY sizes (after unlocking the independent…
A colleague of mine has an Alfa 159 with both of its heated seat controls fallen out of its place because of the broken bezels. Unfortunately, you can only buy the whole control knob, which is not cheap, so he asked me for a 3d print.…
Made these great little additions which make fumbling around for the wing-nuts a thing of the past. Much greater fine tuning capabilities too. Had noticed that a few other users had to scale the component to fit the newer machines which…
Please see my " Heated Bed Guide for the Mega Zero v1.0 (Melzi & Mini MZ) " for details on how to use these: https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:51938 UPDATE: v3 is lower profile and means you can…
This bracket attaches a heated insert iron to the chuck of a WEN 4214T Drill press so you can use the drill press to consistently install heated insert nuts in pieces. DO NOT TURN THE DRILL PRESS ON WHEN USING THIS PRINT. To do so would…
Replacement zipper pull that is used on Makita Heated Jackets. I tried to remake it to be as close as possible to the original while still being easily printable. Printed in 2 halves then glued together. (After gluing I advise to secure…
Description: Keep your soldering workspace neat and organized with this custom-designed TS100 Soldering Iron Organizer. Crafted with precision, this 3D printable box not only holds your TS100 soldering iron securely but also features…
La sujección de los cables de la cama caliente de la Kingroon KP3S no es que sea muy buena que digamos. The fixing of the cables of the heated bed of the Kingroon KP3S is not very good to say. Está sujeta por sólo una brida, con lo que…
Load all STL's at same time as an assembly, colors can be assigned under “Objects” in slicer. Check out my other coasters here!
This is a stubby version of Greg191134's AWESOME CR-10 Strain relief bracket, remixed to fit the Tronxy XY-2 Pro. It will NOT work with the crackling automotive style wire loom that comes with the Tronxy XY-2 Pro. The wires, at least in…
HeatUP is a simple Klipper macro that gradually heats your printer's heated bed instead of jumping directly to the target temperature. The macro automatically splits the temperature increase into 1, 2, or 3 heating stages depending on the…
I remixed the original model to be able to use M3 bolts with M3 4.6x5.7mm heated inserts. I removed holes for 5050 fan and added new holes and position for Raspberry fan.
![[Un]Original Prusa Heated DryBox Beams A1 A2 with Auto Rewinder](https://media.printables.com/media/prints/925049/images/7056012_bf644b3c-83f3-483e-b1af-bba20938186b_619393be-c960-4898-bae1-36c5fa8d33d8/screenshot-2024-06-26-at-84328-pm.png)
