Oxford HotGrips heated grips controller bracket for 22mm handlebar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount for the Oxford heated grips controller, designed to fit 22mm motorcycle handlebars, angled at 10°.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 68
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Update:
Due to popular demand (an astonishing number of 0 downloads), I have updated the file in case you don't have the alu inserts available.
Now there's a widened version with no pre-drilling required, and a version for an M4 nut. Should also fit nylock nuts, which I recommend for this use scenario. Handlebars vibrate.
Note:
The M4 alu inserts mentioned are googlable by the keyword “open end”, and available in hardware stores. I need the mount now, so I can't wait 1 month for the online shop chinese brass stuff.
You will need:
- 2x M4 alu thread insert or 2 M4 nuts
- 2x M4x40mm bolt of your choice
- Soldering iron for alu inserts, nothing for nuts
- Optional: drill with 4.5mm bit if you download the old versions
Instructions:
- Fit the aluminium thread inserts if you use them, otherwise put the M4 nuts in.
- Screw the controller on.
- Assemble the bracket on the handlebar in the desired position.
STEP files provided, in case you need to modify the design. Remix, whatever, just don't sell them.