Oxford HotGrips heated grips controller bracket for 22mm handlebar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Oxford heated grips controller, designed to fit 22mm motorcycle handlebars, angled at 10°.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Update:
Due to popular demand (an astonishing number of 0 downloads), I have updated the file in case you don't have the alu inserts available.
Now there's a widened version with no pre-drilling required, and a version for an M4 nut. Should also fit nylock nuts, which I recommend for this use scenario. Handlebars vibrate.
Note:
The M4 alu inserts mentioned are googlable by the keyword “open end”, and available in hardware stores. I need the mount now, so I can't wait 1 month for the online shop chinese brass stuff.
You will need:
- 2x M4 alu thread insert or 2 M4 nuts
- 2x M4x40mm bolt of your choice
- Soldering iron for alu inserts, nothing for nuts
- Optional: drill with 4.5mm bit if you download the old versions
Instructions:
- Fit the aluminium thread inserts if you use them, otherwise put the M4 nuts in.
- Screw the controller on.
- Assemble the bracket on the handlebar in the desired position.
STEP files provided, in case you need to modify the design. Remix, whatever, just don't sell them.