1 / 5
Bambu Lab heated bed clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With this clamp your heated bed will never warp again!
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 95
- Makes
- 0
- Views
- 1,128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
While warping it could be that the printbed comes off the magnet and that's someting you don' want to happen. (See .gif video)
That's why I made these bed clamps which you can print in PAHT-CF with your bambu lab X1C, you just need to print it in a material that doesn't melt at the heated bed temperature.
Necessary materials:
- DIN933 M4x16
- M4 Short threaded insert
Printsettings:
- 0,6 mm nozzle
- 0,3 mm layer heights
- 4 perimeters
- 4 top -and bottom layers
- 50% Infill
- printed with PAHT-CF
Please note that the STL of Part2 isen't orientated right.