SOVOL SV06 (SV-06) Heated Bed (Y-Axis) Cable Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A heated bed cable strain relief clamp with more support added and an additional passthrough for two zip ties.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 150
- Makes
- 0
- Views
- 1,305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of rogerquin's Cable Strain Relief for SOVOL SV06 3d printer model.
It's the same idea as before, this adapter slides into the existing cable cover from the bottom to secure the bed's cable. This remix has been extended and another passthrough has been added for an additional zip tie. I've also added a cover to go over the extension to provide better clamping force on the cable and clean up the look.
All you'll need is two zip ties, side cutters and some PETG filament. PLA is NOT recommended with how close it will be to a heat source.
Printed in gloss black SUNLU PETG
.2mm Layer Hight
.4mm Nozzle (The cover can NOT be printer with a larger nozzle)
Nozzle Temp - 240c
Bed Temp 85c