holder for foam over Seitz S4 window for isolation - Campervan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For my trip to Norway in winter 2019 with my campervan, I developed a holder for XPS foam over my Seitz S4 windows.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 644
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
For my trip to Norway in winter 2019 with my campervan, I developed a holder for XPS foam over my Seitz S4 windows. This Isolation worked perfectly and I had never any ice or snow inside the living cabin. Of course, you have no view anymore as long the foam plates are isolating the window.
Attention:
You need a minimum of 2 holders in the direction of travel and an overall 5 per window.
Never drive with loosened brackets!!!
I was never going over 120km/h!!
Use Filament wich can handle -20 degrees!!
Use very good double side tape like 3M VHB 5952
AND ALL ON YOUR OWN RISK!!
Print instructions
PETG or ABS. 0.4mm Nozzle, 0.2mm layer hight, 6 parameter with 50% infill.