LNB - POTY - Adapter - to get more space
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mostly used for the POTY. to uplift it with too low LNB holders and so the reflector no longer colides
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 704
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks for supporting me:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://www.paypal.com/paypalme/dm4ds
BMAcoffee: https://buymeacoff.ee/dm4ds
Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u
Etherium: 0x3447f956194706eCDab747314CFB92Bf55428F28
____________________________________________________
Hey,
Thanks for your interest.
This adapter fits most Offset LNB holder or if you have the Opticum one, there is also a version for your needs.
Its designed to get more space between the arm and the LNB holder to mount a POTY.
There is also a version with 5° down of the 22mm hole! while I noticed that many dishes point not correct for our needs.
Print the version you need.
UPDATE 02.08.2019:
Added a Adapter for standard 40mm holders that you can adjust the angle! of the POTY.
If you need modificatios, let me know.
Thanks and happy print / communication
Uploaded again the updates while they were lost during the database Problems on thingiverse.
Print Settings
Printer:
homebrew
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 -0.2
Infill:
40
Filament:
black
Category: DIY