1 / 4
Voron V0.1 V0.2 Cable Tie Mod (Umbilical Anti-Rubbing Mod) — zdjęcie 1
1 / 4

Voron V0.1 V0.2 Cable Tie Mod (Umbilical Anti-Rubbing Mod)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple modification of the original cable tie for the umbilical to avoid rubbing of the belts.

Ocena
5 / 5
Polubienia
25
Pobrania
204
Wydruki
3
Wyświetlenia
1350
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I noticed that the umbilical is rubbing against the CoreXY belts when the X carriage was all the way inside so I designed this simple modification to allow for higher zip-tie-ing of the umbilical. I attack the source file for easy modification if needed.

(Sorry for the images, there was an unwanted filament change, that is why the no-so-best quality of my printed model.)

Printing

No extra stuff here. I printed it with 3 perimeters, 20% infill.

Source files?

I included the Fusion 360 .f3d source files for easy modification. Including source files is cool :)

Misc

Voron V0.1 and V0.2 comparison for the printed parts:
https://docs.google.com/spreadsheets/d/1B-PMh5jIi-f208l2VYXJ8LcJjfaGRh1zJigpPjt-6N0

Feedback is important!

I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.

Commercial inquiries and applications

Please contact me if you like my designs and would like to cooperate.

Donations

I am open to any kind of donation if you want to support me :)

https://paypal.me/andrasbognar

Tagi