Sprite Pro/Ender S1 3010 Fan mount for extra part cooling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another one of my creations to aid in cooling at the speeds and temps I print at.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 59
- Wydruki
- 3
- Wyświetlenia
- 1266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Another one of my creations to aid in cooling at the speeds and temps I print at.
This allows you to place a 3010 fan on the right side of the extruder blowing fresh cold air right on the nozzle to aid in cooling at higher temps/print speeds
Best printed in the orientation shown in the last picture with supports. I print at .2 layer height with a .6 nozzle.
2/5/2023 Added revised model for strength and raised snout height a little for just a little more tolerance from bed in case of blobs/warps.
2/6/2023 Added model in the orientation I recommend to be printed in with supports.
2/6/2023 #2 Revised model to have countersunk bolt holes for flush mount bolts to prevent fan contact as well as extended the pressure fit mounts to grip a little more.
Free my models 4046d480