Drag Chain for Creality Ender 3 S1 Pro Print Cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drag chain that reroutes the print head ribbon cable to the top of the print arm
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 399
- Wydruki
- 2
- Wyświetlenia
- 4312
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had the print head cable break on my Ender 3 S1 Pro within 1 month of receiving the printer. Kudos to Creality to expedite a new cable from China to fix the problem, even over the Chinese the New Year! But, I couldn't tell if this was originally a poorly manufactured cable, design flaw caused by a badly routed cable behind the gantry, or it just was flexing too much in a single spot. So, I searched for a drag chain that would reroute the cable and potentially prevent it from breaking due to movement in the future.
This is a collection from several sources and does not require the Clip S1 if you alternate the chain links. I added the clips later with the hope this provides a bit more stiffness and doesn't cause the ribbon cable to flex and break again. I printed the parts with a generic red PLA @ 200c, bed of 50c, no supports and infill of 15%. No other settings were made from default. I then added the clips later in Hatchbox Red PLA with the same settings in case you see some color difference in the pics (shiny vs more of a matte red from Hatchbox)
Big shout out to Fizzy Chickens for the model and making this work!