Drag Chain for Creality Ender 3 S1 Pro Print Cable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drag chain that reroutes the print head ribbon cable to the top of the print arm
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 399
- Makes
- 2
- Views
- 4,312
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I had the print head cable break on my Ender 3 S1 Pro within 1 month of receiving the printer. Kudos to Creality to expedite a new cable from China to fix the problem, even over the Chinese the New Year! But, I couldn't tell if this was originally a poorly manufactured cable, design flaw caused by a badly routed cable behind the gantry, or it just was flexing too much in a single spot. So, I searched for a drag chain that would reroute the cable and potentially prevent it from breaking due to movement in the future.
This is a collection from several sources and does not require the Clip S1 if you alternate the chain links. I added the clips later with the hope this provides a bit more stiffness and doesn't cause the ribbon cable to flex and break again. I printed the parts with a generic red PLA @ 200c, bed of 50c, no supports and infill of 15%. No other settings were made from default. I then added the clips later in Hatchbox Red PLA with the same settings in case you see some color difference in the pics (shiny vs more of a matte red from Hatchbox)
Big shout out to Fizzy Chickens for the model and making this work!