HK MP5 .22LR Cleaning Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool used to hold the bolt open on a field-stripped .22LR HK MP5 for the purpose of cleaning.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 1999
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A tool used to hold the bolt of a field-stripped .22LR HK MP5 open while cleaning. A more reliable solution than using the internal bolt catch — no more bolt bite on your poor little fingers whilst trying to clean your dirty girl!
The tool sits in the slot in the bolt carrier above the bolt and has a secondary retention clip that snaps over the upper forward indexing pin of the bolt carrier which keeps the bolt held securely to the rear/in the open position to facilitate cleaning.
Print Recommendations:
- Nozzle: 0.4-0.6mm
- Layer Height: 0.2-0.3mm
- Perimeters: 3
- Infill: 15%; your favorite pattern
- Material: PETG or PLA
How to use:
- Slide the narrow end of the tool into the slot on the top of the bolt carrier in front of the bolt.
- Using the tool, push the bolt back until the front lug of the tool drops into the slot.
- Push the retaining clip over the upper indexing pin at the front of the bolt carrier until it snaps into place.
- Clean your internals with peace of mind, knowing you won't accidentally bump the internal bolt catch and send that bolt home on your fingers or cleaning instruments.
- Removal is the opposite of installation.
See photos for installation sequence.