1 / 2
Low Profile Honing Guide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a low profile honing jig to sharpen chisels or planer blades. The low profile makes it work well with very short blades as the one used in pocket planers.
You also need:
- 2 626Z bearings (or similar)
- 2 M6 nuts
- 4 M6 washers
- 2 M6 split washers
- a piece of M6 threaded rod
The source is available in TinkerCad
Print instructions
Category: Hand Tools Summary
This is a low profile honing jig to sharpen chisels or planer blades. The low profile makes it work well with very short blades as the one used in pocket planers.
You also need:
- 2 626Z bearings (or similar)
- 2 M6 nuts
- 4 M6 washers
- 2 M6 split washers
a piece of M6 threaded rod
The source is available in TinkerCadPrint Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Das Filament PLA