Ubiquiti Unify Rack with 2 x 8 Port Patchbay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This rack holds the following Ubiquiti Unifi gear: USG, UC-CK, US-8-150W, and US-8. Also has two 8 port RJ-45 patchbays.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1182
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This rack was made for anyone with Ubiquiti Unifi gear that wants a little rack to tuck into their utility room. It's made specifically the models listed below, but could be easily adapted for other models/configurations.
Is it perfect? No, but it's pretty good. The only thing I might change is opening up the back for easier access to the RJ-45 couplers. Incidentally, the ones I used are standard snap-in RJ-45 keystones purchased from Amazon.
These are the exact models that this rack was made for:
USG Unifi Security Gateway
UC-CK Unifi Cloud Key
US-8-150W Switch 8 PoE (150W)
US-8 Switch 8
You might have to adjust the tolerances for the snap together parts, but when printed on a Prusa MINI, everything went together with minimal filing/sanding. Printed in PLA only because I didn't have any PETG on hand. Also, the reason I broke this up into left and right pieces was to fit on print surface measuring 7" x 7" or 180mm x 180mm. If you have a bigger print area, there's no reason not to join the left and right pieces.
Sketchup files attached.