Ubiquiti Unify Rack with 2 x 8 Port Patchbay
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This rack holds the following Ubiquiti Unifi gear: USG, UC-CK, US-8-150W, and US-8. Also has two 8 port RJ-45 patchbays.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 46
- Makes
- 0
- Views
- 1,182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This rack was made for anyone with Ubiquiti Unifi gear that wants a little rack to tuck into their utility room. It's made specifically the models listed below, but could be easily adapted for other models/configurations.
Is it perfect? No, but it's pretty good. The only thing I might change is opening up the back for easier access to the RJ-45 couplers. Incidentally, the ones I used are standard snap-in RJ-45 keystones purchased from Amazon.
These are the exact models that this rack was made for:
USG Unifi Security Gateway
UC-CK Unifi Cloud Key
US-8-150W Switch 8 PoE (150W)
US-8 Switch 8
You might have to adjust the tolerances for the snap together parts, but when printed on a Prusa MINI, everything went together with minimal filing/sanding. Printed in PLA only because I didn't have any PETG on hand. Also, the reason I broke this up into left and right pieces was to fit on print surface measuring 7" x 7" or 180mm x 180mm. If you have a bigger print area, there's no reason not to join the left and right pieces.
Sketchup files attached.