Beldray Pet Plus Rubber Head Telescope Handle Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector for the Telescope Handle of a Beldray Pet Plus Rubber Head.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
- 2023-02-18: v5 - outer draft on top of the head
- 2023-02-11: v3 - filled out cylinder past the head
Connector for the Telescope Handle of a Beldray Pet Plus Rubber Head (available on Pet Circle).
This is an approximation of the original with measurements taken by caliper. The connection to the telescope handle is friction-based hence quite tight. You might have to give it a bit of a push with a rubber mallet, just be careful to apply the force straight down as to not break it.
I've printed this in PETG with 100% infill and 0.2mm layer height with surface pattern on concentric. The thread end facing on the build plate with support structure generated around the threading. I figured it'd be easier to remove and the threading is fairly tolerant.