Beldray Pet Plus Rubber Head Telescope Handle Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connector for the Telescope Handle of a Beldray Pet Plus Rubber Head.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
- 2023-02-18: v5 - outer draft on top of the head
- 2023-02-11: v3 - filled out cylinder past the head
Connector for the Telescope Handle of a Beldray Pet Plus Rubber Head (available on Pet Circle).
This is an approximation of the original with measurements taken by caliper. The connection to the telescope handle is friction-based hence quite tight. You might have to give it a bit of a push with a rubber mallet, just be careful to apply the force straight down as to not break it.
I've printed this in PETG with 100% infill and 0.2mm layer height with surface pattern on concentric. The thread end facing on the build plate with support structure generated around the threading. I figured it'd be easier to remove and the threading is fairly tolerant.