Counting matching models…
Fits any table top within 22mm or 42mm The prints on the pictures are made of: Prusament PLA Jet Black Headset Hanger 3.0 is available now: https://www.printables.com/model/633754-headset-hanger-30
This is the overhead locker from Borderlands 4! Use it to store all of your epic loot. The model features a spring assisted opening mechanism and holders for a hammer, craft knife, and tape measure. For assembly instructions, please watch…
A cute Halloween pumpkin in the shape of a cat's smiling head, inspired by a Halloween decoration from the game Night In The Woods. There are the following versions: Hollow version with a cap and separated stem - CatPumpkinHollow.stl,…
Simple headset or headphone mount I modeled for myself. You might want to scale it up, as I printed a pretty small one for quick printing time. Also, don't forget to hang properly, I used a small wall anchor for mine.
Note:- The rear portion that attaches to the printer is included ‘ONLY’ in this download set. If you decide to use one of my other alternate cover designs you will need the back plate from t his Version .…
for use with a usb cable for power, Check the photos for the dimensions of the clip for the tracking software
Adjustable Shower Head Holder. If the holder slides too easily in the collet and it cannot be clamped, treat the hinge surfaces with cyanoacrylate glue and let them dry.
A simple v6 cooler. Can hold a can in each “cylinder” and one in the ice chamber. Plenty of space in the middle for sandwiches, and about 7lbs of ice. I designed a V8 version for my dad but it could only use narrow cans to fit on my…
just a remix of the headband brace, what I've changed about the headphones is that I've made the joint holes smaller so that it fits the pins better, and also moved it so it can slot into place, made the m3 holes bigger so that you don't…
this model adds horns fo dummy 13 if youre asking why i didnt print it, i was already printing something
In my opinion the original bracket is too thin and I didn't feel comfortable with it. So I opened it in Fusion and made it thicker. The Orbitool 2 toolhead board still fits, only the “outside” is edited. I used these settings and printed…
Finally, this 3D printed skeleton cat is available! 🐱💀 Composed entirely of 3D printed parts (head, body, and spring), you can use glow-in-the-dark filament for an even more stunning effect. Printed with Bambulab P1S. 🌟 Assembly…
Oldie, but goodie! @fargo3dprinting made in 2015. I'm still printing them! Excellent model. Author's original recommendation: Print at Standard (0.2mm) layer resolution, 50% infill, no supports. I'm able to print with 0.3mm layer and 15%…
I wanted to mount a removable sun shade behind the headrests using magnets included with common rear window sun shades. This setup allows the shade to be installed or removed quickly and utilize the hook to hold a kid's tablet case while…
This model takes the original K9 head and slots a hole to fit standard Dummy 13 accessories in the “mouth”. Prints without supports. Print flat on the “top” of the head (i.e. the side with the ears). The 3MF is laid out correctly.
The Case and Lid inlay combo is capable of holding a very small WS2812 LED Strip. The Other inlay can hold a 5mm RGB LED. 15% Infill minimal Was used in this Workshop:…
Vortex One (V1.0) Dual Gear Direct Drive Printhead for Ender 3 and 3 pro the Vortex One, a stylish, high-performance printhead designed for the Ender 3 series. Equipped with a dual gear direct drive extruder, it ensures precise filament…
The scratcher on this model tilts in all directions to keep the surface in contact during use. Design Features: Print-in-place (no assembly required for the head). No supports required. The handle is a 3/8” wooden dowel (nominal dowel…
Print on PETG tap the hole with a M5 Tap so you can use the go-pro screw
This simple headphone hanger mounts securely to your microphone stand, saving desk space and keeping your workspace organized. Two screws ensure a firm attachment. For assembly, you'll need two M3x20 screws and two M3 nuts .
This headphone stand was designed to be printed in one piece, without support, to be used with larger headphones. I wanted it to be a more minimalist option that would work well in both office and home environments. I have tested this…
If you like my work consider supporting me on boosty , thank you.
The main problem with finding a replacement was that the holes in the wall are 20 mm apart and I didn't want to drill more holes. Since I couldn't find a suitable holder in the DIY store, I simply modeled a replica of the old holder. The…
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
This model is compatible with the lego system.
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
I created this headphone hanger to fold up when not in use. Mounts with four 4mm sink head screws. For the hinge I used a screw M3x30mm, a self securing nut and two washers.
(Higher) Headphones holder with an adjustable screw to fit desk's thickness from 5 to 35mm.
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes except for the face where there are different air options. You will need (2) 4x1.5mm round magnets available: here Glue to install…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes closed except for the Full face where there are different air options. I use this tool head currently. You will need (2) 4x1.5mm…
Tvman Head for dummy 13 v1.0 (Beta) The size corresponds to a dummy 13 scaled to 120%
PUT M8 x 1.25 LONG (28mm or 1.1") HEX NUT AND GLUE SPACER TO THE BOTTOM SLOWLY, HIGH TEMPRATURE.
First I looked at the diadeem and found out that it is much too big. After a few measurements, I scaled the harrart and the axe head to 65%. To make the handle fit into the axe head, I reduced it to 32.5%. But since the harring still…
This is a remix of the "The Laptop Saver - A sub-desk level drink holder" model clamp and a convenient headphone holder
This grip allows to attach battery for headlamp. Grip has been primarily targeted for this headlamp: https://www.kolo-park.cz/obchod/prislusenstvi-1/svetla-a-blikacky/predni-1/predni-svetlo-max1-power-led-20w-1500lm-detail…
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Devil Girl silhouette air hole on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Accidently mis-labeled by afterburner head, and had requests for a stealthburner. Untested as hotend is installed in my afterburner - but has ~1mm clearance requires the V6 collar to be fitted. Nozzle should sit ~3mm below airduct Voron…
One wall on first layer, enable support, easy print Holes for 5x3 magnets and self-tapping screws for fan mount (07/02/2025 New toolhead designs uploaded) (05/02/2026 New toolhead designs uploaded) (05/05/2026 New toolhead designs…
A 3D-printed headphone stand inspired by pikachu's iconic tail. The zigzag tail design features vibrant yellow and brown details, staying true to pikachu's signature look. The sturdy circular base ensures stability, making it a perfect…
Print as shown in the picture (layer 0.12), without supports inside. Build of Materials: Switch OMRON D2F-5 (use NO) - 1pcs. Connector jst 2p 1.27 - 1pcs. Steel ball 5mm - 1pcs. ECAS04 (remove the rubber part) - 1pcs. M2x12 - 2pcs.…
Headphone Stand The design provides sturdy support for headphones while maintaining a lightweight structure. The stand has a stable base for optimal balance and a minimalist design that keeps your workspace organized. Printed with…
Replacement foot pad for Quilter 202 Series Amp / Amplifier Head! Tested on Overdrive 202, but should work for Tone Block 202.
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes (base to model only) Print Duration: 1h 5m Dimensions: a. Model Dimensions Slot…
2026-May-20: I added a 2 wire, 3 wire and 4 wire comb object. 2026-Apr-23: I added an additional style (B version) of the center loom. It's designed for wire routing OVER the rear of the valve covers. This new style does not need the…
This is my version of the QIDI Plus 4 print head cover. Front and rear covers. Plug and play is installed. The rear cover has a place to install a 2507 fan. There are 2 free connectors for 24V fans on the head board. In the “QIDI Plus 4…
A remix of a headband by Ivan for the new year 2025! The numbers are seperated and raised from the headband so you can paint them easily in your multi filament printer! It needs only 11g of filament and prints laying down without supports…
This is so simple I wasn't sure it was worth publishing, but I have found it useful, and it's a good way to use short bits of leftover filament. I use these header pin covers to block header pins that I want to make sure I do not…
A little thicker than the original as well. Category: Toys & Games
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
I designed this headset holder for my JBL Tour One. But i holds my Sennheiser headphones as well. ;) The maximum width is 29mm. It clamps well on a 19mm desk plate. But for a little extra security i added double sided tape on the front…
Dummy 13 Armor Head may need to be scaled down slightly to fit inside helmet.
3D-Scan of a Mushroom head Print settings: Layer height: 0.1mm Layer thickness: 0.4mm (better 0.2mm) Support: Yes I would be delighted if you would choose my file and share photos of it. Many thanks and have fun.
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
Because this bitch is never happy i used cookiecad petg. Only the best is never enough! I just paused at the correct height and changed filament for the color change.
Lemmy from Motorhead. Print in 0.2 mm layers at an infill density of your choice. Make colour changes after every 2 mm of completed print (i.e. at 2.2 mm and 4.2 mm). I used grey, white, then black. No supports or brim required although…
This model is compatible with the lego system.
My M1887 dart blaster didn't come with a bird's head grip, but rather with a not-so-convincing stock. I drew up a printable version. It doesn't fit the curvature exactly, but is still comfortable to hold none-the-less and gives a nicer…
Your choice of material, no supports, 20% infill, print with screw hole side resting on build plate.
Key chain in the shape of head gasket from the Honda CB600F Hornet 1998-2006 I have personally printed it in a TPU since any stiff material is iritating to carry
Key chain in the shape of head gasket from the 2.0TFSI engine code BGB (EA113) I have personally printed it in a TPU since any stiff material is iritating to carry
This is a mod to allow CPAP cooling with the Calamity Toolhead, featuring a new duct design optimized for CPAP. If using in an enclosure, make sure you print this out of something like ABS or ASA! Print Settings Infill: 40% Walls: 5…
Hi Makers! Ball mount is incredibly weak on El Grande Gopro pole, made out of brittle plastic which breaks at first opportunity. There is no official spare part and the head can not even be easily removed as it is molded in the tube. As a…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
Red Skull | Head Sculpture | Exclusive Club Model. Thank you for your support. Semper Fidelis See All Club Models https://www.printables.com/@FreedomMaker/store Support and Licensing: If you would like to help support more free models or…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This model is compatible with the lego system.
Nice and tall headphone stand with the Logitech G logo on the top. Lots of clearance for the cabes and the microphone. Tested with the G PRO X headset. Printed from Hatchbox PETG. It does not need a multicolor 3d printer, just a simple…
Headphone hanger made to be mounted under your desk! The screw holes are 4.5mm (0.177 inch) in diameter. Fits larger headphones as well as smaller ones! Tested to fit: Logitech G Pro X Razer Blackshark V2 Hyperspeed Bose 700 NC Sony…
Easy and fast print to store your headphones on the desk. Hope you like the design and happy printing. Materials 1 x middle part 1x top part 1x bottom part 4 x screws Print instructions Print the middle part on the front and the rest on…
Qidi 4 plus tool head with Batman on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with Ironman on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
reduced to 2 holders Oral-B brushes wall mount
Qidi 4 plus tool head with Jack Sparrow on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Black Cat on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with Three Cats on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Replacement headband clip for the Sony WHCH710N headphones. Modeled in Solidworks based on the unbroken one I had.
Qidi 4 plus tool head with a Cowgirl on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
