Makita Vacuum Head Reinforcement (2mm version)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.63 – €0.77 net (excluding VAT)
For file: Without Support / makita-xlc02-nozzle-reinforcement_04n_02mm_petg_mk4is_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.70 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 32.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A collar to reinforce the attachment head on the Makita handheld vacuum XLC02 which is prone to cracking
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 81
- Makes
- 1
- Views
- 240
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part).
This redesign features a uniform 2mm thickness to provide extra support to the bottom portion of the print. The original has a thickness of 1-1.25mm along the bottom which is where mine cracked. It was designed for the Makita XLC02 series but may also fit the DLC180 series (not 100% certain; leave a comment if it works!).
Fitment also conforms more closely to the original nozzle shape of the XLC02.
- Material
- Printed with PETG (PLA should be fine too).
- Supports
- Support on build plate only.
- Infill
- ANY (not thick enough for custom infill)