Makita Vacuum Head Reinforcement (2mm version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collar to reinforce the attachment head on the Makita handheld vacuum XLC02 which is prone to cracking
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 80
- Wydruki
- 1
- Wyświetlenia
- 240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I printed the original Makita Vacuum Head Reinforcement by @Razzer09 but it cracked along the bottom after my toddler knocked the vacuum off of a table (further emphasizing the need for this part).
This redesign features a uniform 2mm thickness to provide extra support to the bottom portion of the print. The original has a thickness of 1-1.25mm along the bottom which is where mine cracked. It was designed for the Makita XLC02 series but may also fit the DLC180 series (not 100% certain; leave a comment if it works!).
Fitment also conforms more closely to the original nozzle shape of the XLC02.
- Material
- Printed with PETG (PLA should be fine too).
- Supports
- Support on build plate only.
- Infill
- ANY (not thick enough for custom infill)