Counting matching models…
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
This is just a simple remix allowing M3 bolts to be used instead of the M4 bolts.
Screws together with M3 Screws (brass inserts required). There were other models that did similar things, but they were too flimsy and didn't have a good print orientation.
This is a Fully enclosed 1in riser for the Qidi plus4 printer, Consisting of 6 separate pieces. This has slots done over the grab handles and along the back for material reduction (this is a hefty print as it is) but can be used to put…
Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…
contact lends container 5x3=15set and 1set
Here is a set of covers to plug the unused holes/ports behind the printer and make the print chamber a little more airtight. The model was designed to be printed in PP (Polypropylene) and designed to take into account a post-printing…
Secure the mount to the frame with m3 screws and T-nuts. The threaded hole fits a PC4-M10 PTFE coupling.
Ender 5 plus comes without independent stepper motor drivers for the two Z motors, which means that when powered down they easily move a few steps and the bed will tilt a bit and cause an inconsistent first layer. One or two of these…
OnePlus Smart Watch 2. Charger Stand, designed around an after market charger from Amazon, https://amzn.eu/d/i7fQQXG
In order to print PLA, you need to vent the chamber. I designed a quick and simple lid prop. I would print this and in at least PETG, likely higher temp filament like ASA or ABS. No supports, no hassle, quick print.
Added eye slots for easier placing the 20mm eyes and mounts for glasses and hats. Only 2 accessories are available at the moment but I added the hat hole and glasses arms for those who want to make their own hats and glasses. Eye holes…
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor. However, While the BLTouch sensor and clones all seem to…
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
Qidi Plus 4 Tool head with small triangles were added to the front cover for air flow, cosmetic looks. Triangles look small, however I tested this cover printing for several hours with no overheating. Please leave a “Like”, it helps me,…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes except for the face where there are different air options. You will need (2) 4x1.5mm round magnets available: here Glue to install…
Based on my original blank faced model sent to me from Qidi. This Qidi Plus 4 Tool head with all air holes closed except for the Full face where there are different air options. I use this tool head currently. You will need (2) 4x1.5mm…
A remix of an already great spool holder to support the Creality K2 Plus for TPU printing. Printed with the long arm flat, regular PLA, 15% infill. Fits nicely on the profile edges with the top glass off. With the k2 plus having the…
A set of keycaps with a plus and a minus symbol ontop. Remix of 3DLada's keycaps.
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame. I made this remix as my SV06 Plus' z-coupler did not fit inside the original…
Didn't see anyone with a poop chute that went around the Qidi Plus 4 yet. So I decided to slap one together. By no means is this one the best design, but maybe it's a good start for someone to remix? It's not perfect and there are…
The stepper motor drivers on my Qidi X-Plus 4 were reaching temperatures of up to 100°C. I mounted a 40mm x 40mm radial fan with a 3D printed mount. This reduced the temperatures by around 30-40°C. You will need a 40mm x 40mm radial fan…
Qidi 4 plus tool head with Wiley Coyote air holes on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Devil Girl silhouette air hole on front. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Most filament spools measure about 60mm in width. The filament holder in the Elegoo Neptune 4 Plus (and other Elegoo Neptunes) is wider. Usually the spool finds its way to the most misaligned position adding friction and wear. This sleeve…
This part for the Qidi Plus 4 raises the height of your filament spool with 75mm for extra clearance of riser units like my own design or to use larger spools without a vented riser. It is recommended to use more walls and higher…
Because I needed a model of the TMC 5160 Plus stepper driver from Mellow 3D, but couldn't find one, I decided to model it. Enjoy! Link to Mellow's doc for the driver can be found here .
Please before attempting to print this files. Print the Tolerance test from Orca slicer and be sure you can go up to 1, or the one we have made Here you can download the Toolhead for this Project that is the same for SV06 and SV06 Plus…
This is my version of the QIDI Plus 4 print head cover. Front and rear covers. Plug and play is installed. The rear cover has a place to install a 2507 fan. There are 2 free connectors for 24V fans on the head board. In the “QIDI Plus 4…
To be used with STL file SV06 Plus Filament Holder w/Guide and Retractable cable holder ➕ ・Template to download and 3D print・Cults
Beschreibung An easy-to-print housing for the Shelly plus 1, Shelly plus 1PM, Shelly Plus Gen 2 and Gen 3 The housing has space for up to 3 WAGO 221 clamps. The cables are neatly and securely fixed with cable ties. The reset button and…
I took the mounting part of the filament sensor mount as inspiration and I made a wider clip with a UBBI connection at a 45 degree angle. There is also a hole for sticking filament that you aren't using (like a filament clip). I hung my…
Puzzle description: There are 36 different hexominoes (consisting of six squares each) and 12 pentominoes (five squares each). They consist of 270 small squares which can be packed into many frames, see…
2x Halterung für WERA Tool Check Plus - 37x9er Lochwände oder Skadis Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Short- und Long-Bits Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
Guarding touchscreen from toddlers that like to push buttons on screen :) Slides from top to bottom and vice versa. Use both hands to do it straight. Print verticaly. I've used 0.6w walls and 0.2 layer height.
Requirements: You will need two 25mm M4 screws for installation. I bought the Bowden parts on Amazon as a kit: https://www.amazon.com/gp/product/B0CMQN1681/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This remix of the Elegoo Neptune 4…
Ich habe für einige Spulen einen längeren Spulenhalter benötigt. Außerdem habe ich eine 60mm Abschlussplatte angefügt. Ich habe ihn in PETG gedruckt, sollte aber mit jedem beliebigen Filament funktionieren.
1x5 Gridfinity bin for Wera Tool-Check Plus.
I made this to allow me to use bigger (thicker) spools on my Qidi Plus 4 than the regular cap will allow. I hope it helps you too. Print upright with no support in any filament you like - mine is ABS using standard settings and its great…
Overview I think we can all agree that the plus 4 needed a filter redesign and a HEPA filter added. This variation features an aesthetically pleasing design and great filtration. It works extremely well in conjunction with the 8038 Fan…
Hi, I have developed new PTFE clips for the K2 Plus and have also modified my K1 bowden clips to be compatible with the K2 Plus. Currently, there are two designs available: one replicates the original factory K2 Plus clips, while the…
DE: Fadenbuchse für eine Stickmaschine vom Typ Melco EMT16 und Melco EMT16 Plus. Gedruckt mit 0.15mm Schichthöhe, PLA und PETG funktioniert gleichermaßen. In aufrechter Position drucken mit Stützen auf dem Druckbett. EN: Thread bushing…
Created this as a cover/case for the enviro sensor-Pi fits Pimoroni PIM486 Sensor board and fits snug on the front to protect/cover it. I used 90 degree GPIO risers and modified the case as you can see and allowed me to get it away from…
Qidi 4 plus tool head with Batman on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with Ironman on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with Jack Sparrow on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Black Cat on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with Three Cats on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
Qidi 4 plus tool head with a Cowgirl on the front. This design is built onto my upgraded tool head cover. Print petg, abs, face down, 50% infill Please leave a “Like”, Thank you
This is a direct edit of the “__raspi_module_1_01-SIF_OLED.stl” module from the Modular Snap Together Raspberry Pi Case , and the only things i changed is 1: I made the OLED cutout bigger to allow you to mount it forwards or backwards,…
I print larger prints that take up most of the bed for my business and 1 of my K2 plus's bed magnet was coming up from the print warping a bit. I designed these clamps to assist on holding the bed and print. It works great no warping…
Project done in collaboration with @Print3DPilot We wanted to upgrade an Anet A8 Plus to a Stealthburner. We initially thought the Voron Legacy part would be a drop in fit but the distance between linear rod centres were 40mm vs ~50mm on…
Filament cutter adapted for the sapphire plus v3 (Work in progress). Fits TwoTrees Sapphire Plus v3 only. Video of how it works. A detail to take into account, the filament cutter sacrifices a little bit of printing area to cut, it is not…
Ich habe eine einfache Gehäuseerhöhung für den Glasdeckel vom K2 Plus entworfen - platzsparend, ohne Schnickschnack. 😉 Damit schleift der Filamentschlauch dann nicht mehr am Deckel. 👍🙂 Die Elemente werden einfach, in 2 Durchgängen,…
UPDATES: 01/06/2026 Updated tolerances on Upper Front, Rear, and Top Rail, alongside more space for the ESC. Thicker Cage Mount Front, means barrel is less likely to wobble around and come loose Cage Roller added to Cage Mount Front,…
Remixed the shroud to cover the Cartographer and added a simple cable guide for a USB cable with about 3.2 mm in diameter. To use this shroud you also need the remixed Cartographer mount! - I have left the mounting position of the…
2 magnets (max dimension: 15x8mm) are needed to attach it to the back. (I used 15x5mm). This makes it easy to empty the container. Magnet cower should fit snugly. The container has the necessary distance from the wall so that it does not…
A replacement frame for the Hario Skerton Plus coffee grinder with improved shaft design for a more uniform grind. As this is a direct replacement of the original frame, no other parts are required. The center hole has a thread to allow…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
I made this to fit https://www.printables.com/model/772459-boost-your-multicolor-prints-central-filament-sens It allows the filament sensor to still pivot. All I had to use it the original 2 screws and 1 hex screw in the back of the…
I have some long bits that not fit in case, so i'm need something to organize it in workshop. Print from PETG work good, no supports needed (with good cooling). Put insert into main part, then tеighten the nut, then tеighten the hat. All…
Beacon Simmetric Holder Reworked for QIDI Plus4
Where did I put those snips…? With this side mounted storage box, you can finally keep your tools all organised and together, right at your printer's side.
In the second version I removed the ugly step :)
Updated 2026.03.31 - I am absolutely a huge proponent of r3men's graphite beds and love mine. https://r3men.com/products/graphite-heated-bed-upgrade-kit-for-creality-k2-plus?ref=stranula This design was always labelled as a beta as its…
The changed fan grille allows for more airflow to be brought in by the fan. I printed mine in ABS and had just a tiny bit of shrinkage.
3D scan of the TV character Homer Simpson in his plush toy version. The mesh has been slightly processed so it can be printed without issues. I hope you find it useful.
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
I liked the various Gridfinity bins that are available to hold Bambu spare parts, but I could not find any for my K2 Plus parts, so I created a few using the FreeCAD Gridfinity workbench
For best results us supports and PETG or ABS. I did prototype it with PLA, and while is should work I liked the rigidity of PETG.
INFO The Afterburner motor plate with an added hole. This is designed to be used with the extruder body of the Afterburner (the version with the hole on the side) and one of my mounts for the Neptune 3 series toolhead PCB. REQUIRED…
This custom-designed wireless charger mount is perfect for Audi A5 and A4 models from 2016 to 2024. It is compatible with the OnePlus AIRVOOC 50W Magnetic Charger , making it ideal for OnePlus 12 and 13 phones with MagSafe ring covers.…
A holder for the Abus Bordo X Plus (6500) to put it in your bottle cage/holder of your bike. I printed it for my dad, because the lock is kinda heavy. Does make a bit of noise, but it still gets used sometimes when my dad goes out cycling.
This is a film holder for 127 film for use in the Plustek OpticFilm 120 series of film scanners. It is pre-split so it can be printed on a reasonable size printer. The two halves snap together and should be glued or taped together. I…
This case has been designed to replcae the lid of the GMKTec G3 Plus (Intel N150) to give active airflow to the NVME and RAM. Numerous variations/combos available: 80mm and 60mm fans 25mm and 15mm fan heights Enclosed or flat for mounting…
UPDATE : (v1-2, 1 mar 2026) added a cutout for the heater housing on the printhead pcb: BOM : 2xM2 bolt 6mm 2xM2 nut 2xM3 bolt 4 or 6mm 3xZip Tie 2mm width Description : I made this mount for easy printhead removal, allowing the…
Test Piatto Artillery Sidewinder X4 Plus S1 per poter controllare il giusto livellamento del piatto stampa di 30x30cm (Print time 5min ca). Consigliabile stamparlo senza gonna e senza tesa.
Fits perfectly onto the Samsung FIT Plus USB sticks. The outer shape fits the shape of the sticks housing. Enjoy & have fun! Material: PETG Layerheight: 0.2mm Infill: 15% I used 3 wall lines
You can find my version 2 here https://www.printables.com/model/1477514-qidi-plus-4-box-riser-v2 Qidi Box Riser for mounting above the plus 4. Will clear stew675 riser for top glass. To remove glass you must lift glass, glass riser, and…
This custom putter was designed to fill a gap in the golf world. Price. Now, not everyone needs to spend a small fortune just to get a competitive edge in the short game. Complete with customizable weighting to boost performance, the…
Magically produce a plushie with this wineglass gimmick. Effect demo: The handling of LazZiPlushy is almost the same as that of LazZipop (also available) so take it as a reference. Designed in Hong Kong. Category: Games
This is a 1/4” Hex bit box designed to be fitted with Milwaukee tool belt hook so it can be worn on a belt. Box and bit holder are a close fit, I printed this in TPU, though it should work in any filament, perhaps needing a bit of finish…
It is a modified version of the schute created by Sergej Riedel under ID 1023520.
made this because I use calculators a lot and didn't want to crane my neck every time I needed to look at it so here we are.
This screen mount is designed for the Elegoo Neptune 3 and 4 series. It attaches securely to the side of the printer without any screws, providing a hassle-free installation. Two versions are available: the lower model and the upper…
Added side supports to use the Cloweit LBE-04 inductive proximity sensor
A rail to make adding stuff under your table easier… I recommend you print the screws at 100% infill, they sometimes snap when printed at lower infills, also you might need pliers to twist them into place, the tolerance is quite low The…
Wanted to incorporate another model in my setup. This time instead of modifying or modeling the rack mount shelf, an existing OpenSCAD library suitable to the purpose was used. Found https://github.com/wildegnux/universal-rack-shelf in…
The GameSir G8 Plus doesn’t come with a built-in charging option for your phone, so I designed this tool to fix that. It securely holds a right-angle charger in place, letting you charge while you play without stressing the cable or…
What does it do? This model allows you to clip the Airthings Wave Plus to the top of the printer, that clips in the small ridge by the top glass. Why did I make it? I wanted an easy way I could measure the amount of VOCs coming out of the…
it is a project made by myself. I just started with design programs and I wanted to make something easy. i recommend using nuts insertion it should be printed with material that can withstand the heat (ABS, ASA,….)
Bring home the cuddly charm of a beloved toy with this 3D printable STL model of an Elephant Plushie. This adorable stuffed animal is perfect for adding a touch of soft, gentle appeal to your displays, children's rooms, or as a sweet…
Similar to the stock case with the following changes Optimized for FDM printing cover prints facedown with no supports longer body with room for 3000mah battery requires 2mm heat set thread inserts added place for 2.5mm heat set thread…
UPDATE: 02.2026 - After a few months of Printing everything from PLA to PPS, it is holding up great. Ive had the sensor arm get stuck about 3 times, had to unbolt it, gave it a nudge and it snapped back forward, increased the clearance by…
I needed a cover that can become a lightweight stand for my Elgato Stream Deck Plus ( https://www.elgato.com/fr/en/p/stream-deck-plus ). To use this cover/stand, you just need to remove the 2 screws under the original stand (which is very…
UPDATE : A short version has been added more detail below A short version for people that want it to be shorter. It has been shortened by 60mm in height. I also noticed that its dampening of X vibrations has been increased compared to the…
![Clip-On Filament Roller Guide V2 For Ender 3 S1 [Pro/Plus] (M3 Bolts)](https://media.printables.com/media/prints/1013634/images/7703360_faf4caca-950a-4e85-9664-8e10a2c71f7c_574e6577-6df6-440a-859a-d2afcc79438c/prwb.png)
![Table Rails For Addons [plus a bin i added now but i am too lazy to print...]](https://media.printables.com/media/prints/d3a0c167-84cc-41bc-9f00-d32905b5ad7b/images/10507436_8417ab99-fc49-4a0b-b887-5d6850edf69f_87c2fd22-fe6a-4b44-b315-cf3c3ef83482/img_20250822_145650154.jpg)
